September 2006
rev 0.4
PCS2I99447
3.3V/2.5V 1:9 LVCMOS Clock Fanout Buffer
Features
PCS2I99447 is specifically designed to distribute LVCMOS
compatible clock signals up to a frequency of 350 MHz.
Each output provides a precise copy of the input signal with
a near zero skew. The outputs buffers support driving of
50Ω terminated transmission lines on the incident edge:
each is capable of driving either one parallel terminated or
two series terminated transmission lines.
•
•
•
•
•
9 LVCMOS Compatible Clock Outputs
2 Selectable, LVCMOS Compatible Inputs
Maximum Clock Frequency of 350 MHz
Maximum Clock Skew of 150 pS
Synchronous Output Stop in Logic Low State
Eliminates Output Runt Pulses
Two selectable independent LVCMOS compatible clock
inputs are available, providing support of redundant clock
source systems. The PCS2I99447 CLK_STOP control is
synchronous to the falling edge of the input clock. It allows
the start and stop of the output clock signal only in a logic
low state, thus eliminating potential output runt pulses.
Applying the OE control will force the outputs into high
impedance mode.
•
•
•
•
•
•
High–Impedance Output Control
3.3V or 2.5V Power Supply
Drives up to 18 Series Terminated Clock Lines
Ambient Temperature Range -40°C to +85°C
32 Lead LQFP and TQFP Packaging
Supports Clock Distribution in Networking,
Telecommunications and Computer Applications
Pin and Function Compatible to MPC947 and
MPC9447
All inputs have an internal pull–up or pull–down resistor
preventing unused and open inputs from floating. The
device supports a 2.5V or 3.3V power supply and an
ambient temperature range of –40°C to +85°C. The
PCS2I99447 is pin and function compatible but
performance enhanced to the MPC947 and MPC9447.
•
Functional Description
The PCS2I99447 is a 3.3V or 2.5V compatible, 1:9 clock
fanout buffer targeted for high performance clock tree
applications. With output frequencies up to 350 MHz and
output skews less than 150 pS, the device meets the needs
of most demanding clock applications.
PulseCore Semiconductor Corporation
1715 S. Bascom Ave Suite 200, Campbell, CA 95008 • Tel: 408-879-9077 • Fax: 408-879-9018
www.pulsecoresemi.com
Notice: The information in this document is subject to change without notice.