Low-Voltage Inhibit (LVI)
9.5 LVI Interrupts
The LVI module does not generate interrupt requests.
9.6 Wait Mode
The WAIT instruction puts the MCU in low power-consumption standby mode.
With the LVIPWR bit in the configuration register programmed to 1, the LVI module
is active after a WAIT instruction.
With the LVIRST bit in the configuration register programmed to 1, the LVI module
can generate a reset and bring the MCU out of wait mode.
9.7 Stop Mode
If enabled, the LVI module remains active in stop mode. If enabled to generate
resets, the LVI module can generate a reset and bring the MCU out of stop mode.
Data Sheet
110
MC68HC908MR32 • MC68HC908MR16 — Rev. 6.0
Low-Voltage Inhibit (LVI)
MOTOROLA
FREESCALE [ Freescale ]
