Chapter 5. DC and Switching
Characteristics
MII51005-2.2
System designers must consider the recommended DC and switching
conditions discussed in this chapter to maintain the highest possible
performance and reliability of the MAX® II devices. This chapter contains
the following sections:
Introduction
■
■
■
“Operating Conditions” on page 5–1
“Power Consumption” on page 5–10
“Timing Model and Specifications” on page 5–10
Tables 5–1 through 5–12 provide information about absolute maximum
ratings, recommended operating conditions, DC electrical characteristics,
and other specifications for MAX II devices.
Operating
Conditions
Absolute Maximum Ratings
Table 5–1 shows the absolute maximum ratings for the MAX II device
family.
Table 5–1. MAX II Device Absolute Maximum Ratings Notes (1), (2) (Part 1 of 2)
Symbol
Parameter
Conditions
Minimum
–0.5
Maximum
Unit
V
VCCINT
With respect to ground
4.6
4.6
4.6
25
Internal supply voltage (3)
I/O supply voltage
VCCIO
VI
—
—
—
–0.5
V
DC input voltage
–0.5
V
IOUT
DC output current, per pin
–25
mA
(4)
TSTG
TAMB
Storage temperature
Ambient temperature
No bias
–65
–65
150
135
°C
°C
Under bias (5)
Altera Corporation
July 2008
5–1
ALTERA [ ALTERA CORPORATION ]
