VTAC HSD USER’S MANUAL: SECTION 2
VIRGINIA PANEL CORPORATION
VTAC HSD INSERT REMOVAL INSTRUCTIONS FOR i2 MX ITA
PART # 410 130 XXX
REMOVAL INSTRUCTIONS (CONTINUED)
4. Using a Phillips head screwdriver, loosen the six screws
(captive) that secure the backshell halves. Remove the
half with the screws (Figure C).
5. Using a nut driver remove nuts on the strain relief clamp,
then remove the clamp (Figure D).
BACKSHELL
SCREWS
Figure C. Backshell cover removal.
NUT
STRAIN RELIEF
CLAMP
Figure D. Strain relief clamp removal.
6/13/16
2-7
For the most current information available, visit www.vpc.com
VPC [ VIRGINIA PANEL CORPORATION ]
