VTAC HSD USER’S MANUAL: SECTION 1
VIRGINIA PANEL CORPORATION
i2 MX ITA PART IDENTIFICATION
PART # 410 130 XXX
Figure B points out distinguishing features of the i2 MX ITA so that the top and bottom
can be identified. Features to look for are the numeric keying receptacle at the top
and the alpha keying receptacle on the bottom.
When holding the i2 MX ITA, the top can be determined when the letters and numbers
are readable. The top position is designated by a black marking around the upper slot
in Tier A and Tier B module locations (Figure B).
The front and rear of the i2 MX ITA are easily distinguished as shown in Figure C. The
front has a protruding guide plate with locking tabs (Figure A) and the rear has the
knob.
Figure D shows the rear silkscreen that aides in indicating positions.
LOCKING TABS
The front side mates with the i2 MX receiver. The front has a polarizing feature which
prevents the ITA and receiver from being engaged in the incorrect orientation. Wires
exit the i2 MX ITA through the 30° cable exit (Figure C).
Figure A. i2 MXITA
POLARIZING
FEATURE
TOP
KNOB
INDICATES 5
POSITIONS
NUMERIC
KEYING
RECEPTACLE
POSITION A1
INDICATOR
TIER A
FRONT
MATING
SIDE
REAR
WIRING
SIDE
TIER B
30° CABLE EXIT
ALPHA
KEYING
RECEPTACLE
BOTTOM
Figure D. i2 MX ITA rear
view (backshell
removed).
Figure B. i2 MX ITA front view (back-
shell removed)
Figure C. i2 MX ITA side view.
6/13/16
1-4
For the most current information available, visit www.vpc.com