Z8FMC16100 Series Flash MCU
Product Specification
79
Bit
Value
(H)
Description
Position
[7]
Place PWM outputs in off-state
PWMOFF
0
1
Disable modulator control of PWM pins. Outputs are in predefined off-state. This
is not dependent on the reload event.
Re-enable modulator control of PWM pins at next PWM reload event.
[6]
PWM Output Control
OUTCTL
0
1
PWM outputs are controlled by the Pulse-Width Modulator.
PWM outputs selectively disabled (set to off-state) according to values in the
OUTx bits of the PWMOUT register.
[5]
PWM Edge Alignment
ALIGN
0
1
PWM outputs are edge aligned.
PWM outputs are center aligned.
Reserved
[4]
Reserved
[3]
ADC Trigger Enable
ADCTRIG
0
1
No ADC trigger pulses.
ADC trigger enabled.
Reserved
[2]
Reserved
0
0
1
[1]
Values Ready for Next Reload Event
PWM values (pre-scale, period, and duty cycle) are not ready. Do not use
values in holding registers at next PWM reload event
PWM values (pre-scale, period, and duty cycle) are ready. Transfer all values
from temporary holding registers to working registers at next PWM reload event.
READY
[0]
PWM Enable
PWMEN
0
1
Pulse-width modulator is disabled and enabled PWM output pins are forced to
default off-state. PWM master counter is stopped. Certain control registers may
only written in this state.
Pulse-width modulator is enabled and PWM output pins are enabled as outputs.
PS024604-1005
P R E L I M I N A R Y
PWM Control 0 Register
ZILOG [ ZILOG, INC. ]
