Z8 Encore! XP® F08xA Series
Product Specification
40
1 = The alternate function selected through Alternate Function Set sub-registers is
enabled. Port pin operation is controlled by the alternate function.
Port A–D Output Control Sub-Registers
The Port A–D Output Control sub-register (Table 20) is accessed through the Port A–D
Control register by writing 03Hto the Port A–D Address register. Setting the bits in the
Port A–D Output Control sub-registers to 1 configures the specified port pins for open-
drain operation. These sub-registers affect the pins directly and, as a result, alternate func-
tions are also affected.
Table 20. Port A–D Output Control Sub-Registers (PxOC)
BITS
7
6
5
4
3
2
1
0
POC7
POC6
POC5
POC4
POC3
POC2
POC1
POC0
FIELD
RESET
R/W
0
0
0
0
0
0
0
0
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
If 03H in Port A–D Address Register, accessible through the Port A–D Control Register
ADDR
POC[7:0]—Port Output Control
These bits function independently of the alternate function bit and always disable the
drains if set to 1.
0 = The drains are enabled for any output mode (unless overridden by the alternate func-
tion).
1 = The drain of the associated pin is disabled (open-drain mode).
Port A–D High Drive Enable Sub-Registers
The Port A–D High Drive Enable sub-register (Table 21) is accessed through the Port
A–D Control register by writing 04Hto the Port A–D Address register. Setting the bits in
the Port A–D High Drive Enable sub-registers to 1 configures the specified port pins for
high current output drive operation. The Port A–D High Drive Enable sub-register affects
the pins directly and, as a result, alternate functions are also affected.
Table 21. Port A–D High Drive Enable Sub-Registers (PxHDE)
BITS
7
6
5
4
3
2
1
0
PHDE7
PHDE6
PHDE5
PHDE4
PHDE3
PHDE2
PHDE1
PHDE0
FIELD
RESET
R/W
0
0
0
0
0
0
0
0
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
If 04H in Port A–D Address Register, accessible through the Port A–D Control Register
ADDR
PS024705-0405
P R E L I M I N A R Y
General-Purpose I/O
ZILOG [ ZILOG, INC. ]
