R
Virtex-II Platform FPGAs: DC and Switching Characteristics
Revision
Date
Version
07/30/01
1.6
•
•
Updated values in the Virtex-II Performance Characteristics and Virtex-II Switching
Characteristics tables.
Added values to the Virtex-II Pin-to-Pin Output Parameter Guidelines and Virtex-II
Pin-to-Pin Input Parameter Guidelines tables.
•
•
Added Frequency Synthesis table.
10/02/01
1.7
Updated values in the Virtex-II Performance Characteristics and Virtex-II Switching
Characteristics tables.
•
Updated the speed grade designations used in data sheets, and added Table 13, which
shows the current speed grade designation for each device.
10/05/01
10/12/01
1.8
1.9
•
•
Corrected the speed grade designation for the XC2V1000 device in Table 13.
Updated values in the Virtex-II Performance Characteristics and Virtex-II Switching
Characteristics tables.
11/28/01
01/03/02
2.0
2.1
•
Updated values in Table 3, Table 4, Table 5, Virtex-II Performance Characteristics, and
Virtex-II Switching Characteristics tables.
•
•
Updated values in Virtex-II Performance Characteristics and Virtex-II Switching
Characteristics tables, based on values extracted from speedsfile version 1.96.
Changed the speed grade designation for the XC2V6000 device in Table 13.
07/16/02
2.2
•
•
Updated values in Table 4, "Quiescent Supply Current."
Updated values in Virtex-II Performance Characteristics and Virtex-II Switching
Characteristics tables, based on values extracted from speedsfile version 1.111.
Added Enhanced Multiplier Switching Characteristics section.
Added footnote to Table 37, "Global Clock Setup and Hold for LVTTL Standard, Without
DCM."
•
•
•
Added Source-Synchronous Switching Characteristics section.
09/26/02
12/06/02
2.3
2.4
•
•
Removed mention of MIL-M-38510/605 specification.
Added footnotes to Table 2 and Table 6.
•
•
•
Revised SSTL2 values in Table 6 to match the latest JEDEC specification.
Added footnote regarding V PCI compliance to Table 1.
IN
Added footnote regarding CLKOUT_DUTY_CYCLE_DLL to Table 41.
05/07/03
2.5
•
•
•
•
Updated values in Virtex-II Performance Characteristics and Virtex-II Switching
Characteristics tables, based on values extracted from speedsfile version 1.114.
Table 4, Quiescent Supply Current, and Table 5, Minimum Power On Current Required
for Virtex-II Devices: Added parameters for XC2V8000 device.
Table 16, IOB Output Switching Characteristics: Changed parameter designator
T
to T
.
IOTON
IOTP
Table 26, Enhanced Multiplier Switching Characteristics: Corrected all parameter
designators from T
used in speedsfile.
to T
in order to correspond with designators
MULT_P[nn]
MULT1_P[nn]
•
Table 27, Enhanced Pipelined Multiplier Switching Characteristics: Corrected all
parameter designators from T to T in order to correspond
MULTCK_P[nn]
MULTCK1_P[nn]
with designators used in speedsfile.
•
•
Removed old Table 19, Standard Capacitive Loads.
Added Figure 1, page 17, showing test configuration for measuring I/O standard
adjustments.
06/19/03
2.5.1
•
Removed footnotes in Table 34 and Table 36 that stated DCM jitter was included in the
measurements.
DS031-3 (v3.5) November 5, 2007
Product Specification
www.xilinx.com
Module 3 of 4
42