WM8772EFT – 32 LEAD TQFP
Production Data
DIN1/2/3 are sampled by the WM8772EFT on the rising edge of DACBCLK so the controller must
output DAC data that changes on the falling edge of DACBCLK. ADC data is output on DOUT and
changes on the falling edge of ADCBCLK.
By setting control bit DACBCP the polarity of DACBCLK may be reversed so that DIN1/2/3 are
sampled on the falling edge of DACBCLK.
By setting control bit ADCBCP the polarity of ADCBCLK may be reversed so that DOUT changes on
the rising edge of ADCBCLK.
ADCBCLK
ADCLRC
DACBCLK
DSP/
WM8772
CODEC
ENCODER/
DECODER
DACLRC
DOUT
DIN1/2/3
3
Figure 46 Master Mode
AUDIO INTERFACE FORMATS
Audio data is applied to the internal DAC filters, or output from the ADC filters, via the Digital Audio
Interface. 5 popular interface formats are supported:
•
•
•
•
•
Left Justified mode
Right Justified mode
I2S mode
DSP mode A
DSP mode B
All 5 formats send the MSB first and support word lengths of 16, 20, 24 and 32 bits, with the
exception of 32 bit right justified mode, which is not supported.
In left justified, right justified and I2S modes, the digital audio interface receives DAC data on the
DIN1/2/3 inputs and outputs ADC data on DOUT. Audio Data for each stereo channel is time
multiplexed with ADCLRC or DACLRC indicating whether the left or right channel is present.
ADCLRC or DACLRC is also used as a timing reference to indicate the beginning or end of the data
words.
In left justified, right justified and I2S modes, the minimum number of DACBCLK/ADCBCLK’s per
DACLRC/ADCLRC period is 2 times the selected word length. ADCLRC/DACLRC must be high for a
minimum of word length DACBCLK/ADCBCLK’s and low for
a minimum of word length
DACBCLK/ADCBCLK’s. Any mark to space ratio on ADCLRC/DACLRC is acceptable provided the
above requirements are met.
In DSP mode A or mode B, all 6 DAC channels are time multiplexed onto DIN1. DACLRC is used as
a frame sync signal to identify the MSB of the first word. The minimum number of DACBCLK’s per
DACLRC period is 6 times the selected word length. Any mark to space ratio is acceptable on
DACLRC provided the rising edge is correctly positioned. The ADC data may also be output in DSP
mode A or mode B, with ADCLRC used as a frame sync to identify the MSB of the first word. The
minimum number of ADCBCLK’s per ADCLRC period is 2 times the selected word length
PD Rev 4.2 October 2005
52
w
WOLFSON [ WOLFSON MICROELECTRONICS PLC ]
