欢迎访问ic37.com |
会员登录 免费注册
发布采购

TLK10002 参数 Datasheet PDF下载

TLK10002图片预览
型号: TLK10002
PDF下载: 下载PDF文件 查看货源
内容描述: 10Gbps的双通道多速率收发器 [10Gbps Dual-Channel Multi-Rate Transceiver]
分类和应用:
文件页数/大小: 73 页 / 619 K
品牌: TI [ TEXAS INSTRUMENTS ]
 浏览型号TLK10002的Datasheet PDF文件第41页浏览型号TLK10002的Datasheet PDF文件第42页浏览型号TLK10002的Datasheet PDF文件第43页浏览型号TLK10002的Datasheet PDF文件第44页浏览型号TLK10002的Datasheet PDF文件第46页浏览型号TLK10002的Datasheet PDF文件第47页浏览型号TLK10002的Datasheet PDF文件第48页浏览型号TLK10002的Datasheet PDF文件第49页  
TLK10002  
www.ti.com  
SLLSE75 MAY 2011  
LOOPBACK_TP_CONTROL Address: 0x0B Default: 0x0700  
BIT(s)  
NAME  
DESCRIPTION  
ACCESS  
RW  
B.15:14 RESERVED  
For TI use only  
B.13  
B.12  
HS_TP_GEN_EN  
HS_TP_VERIFY_EN  
0 = Normal operation (Default 1b0)  
1 = Activates test pattern generation selected by bits B.10:8  
RW  
0 = Normal operation (Default 1b0)  
RW  
1 = Activates test pattern verification selected by bits B.10:8  
B.10:8 HS_TEST_PATT_SEL[2:0]  
Test Pattern Selection. Note that for CRPAT, TPsync must be high to be valid. See  
MDIO bit F.15.  
RW  
000 = High Frequency Test Pattern  
001 = Low Frequency Test Pattern  
010 = Mixed Frequency Test Pattern  
011 = CRPAT Short  
100 = CRPAT Long  
101 = 27 - 1 PRBS pattern  
110 = 223 - 1 PRBS pattern  
111 = 231 - 1 PRBS pattern (Default 3b111)  
Errors can be checked by reading HS_ERROR_COUNTER register (0x10)  
B.7  
LS_TP_GEN_EN  
0 = Normal operation (Default 1b0)  
RW  
1 = Activates test pattern generation selected by bits B.5:4 on the LS side  
Requires setting of LS_RX_ENTEST (8.2) for desired lane on the LS side  
B.6  
LS_TP_VERIFY_EN  
0 = Normal operation (Default 1b0)  
1 = Activates test pattern verification selected by bits B.5:4 on the LS side  
Requires setting of LS_TX_ENTEST (8.3) for desired lane on the LS side  
RW  
RW  
B.5:4  
LS_TEST_PATT_SEL[1:0]  
Test Pattern Selection  
00 = 231 - 1 PRBS pattern (Default 2b00)  
01 = Alternating 0/1 pattern with a period of 2 UI (LS side bit UI)  
10 = 27 - 1 PRBS pattern  
11 = 223 - 1 PRBS pattern  
B.3  
DEEP_REMOTE_LPBK  
0 = Normal functional mode (Default 1b0)  
RW  
1 = Enable deep remote loopback mode  
Requires setting of LS_TX_ENTEST(8.3) and LS_RX_ENTEST (8.2) for desired lane  
on the LS side.See Figure 12 and MDIO bit 6.7 for additional controls.  
B.2  
B.1  
B.0  
SHALLOW_REMOTE_LPBK  
DEEP_LOCAL_LPBK  
0 = Normal functional mode (Default 1b0)  
1 = Enable shallow remote loopback mode/serial retime mode  
RW  
RW  
RW  
See Figure 13  
0 = Normal functional mode (Default 1b0)  
1 = Enable deep remote loopback mode  
See Figure 14  
SHALLOW_LOCAL_LPBK  
0 = Normal functional mode (Default 1b0)  
1 = Enable shallow remote loopback mode  
See Figure 15  
Copyright © 2011, Texas Instruments Incorporated  
45  
 复制成功!