Table 4−9. General Control Register Description (Continued)
BIT
SIGNAL
TYPE
FUNCTION
Dedicated Smart Card power control. This bit determines how power to the dedicated Smart Card
socket is controlled.
0 = Controlled through the SC_PWR_CTRL terminal (default)
1 = Controlled through the VPP voltage of socket B of the CardBus power switch (the design
must ensure that this mode can only be set when CardBus socket B is disabled).
DED_SC_PWR_
CTRL
2 ‡
RW
Controls top level PCI arbitration:
00 = 1394 OHCI priority
01 = CardBus priority
10 = Flash media/SD host priority
11 = Fair round robin
1−0 ‡
ARB_CTRL
RW
Note: When flash media/SD host priority is selected, there must be a two-level priority scheme with the
first level being a round robin between the flash media and SD host functions and the second level being
a round robin between the CardBus and 1394 functions.
‡
One or more bits in this register are cleared only by the assertion of GRST.
4.32 General-Purpose Event Status Register
The general-purpose event status register contains status bits that are set when general events occur, and can be
programmed to generate general-purpose event signaling through GPE. See Table 4−10 for a complete description
of the register contents.
Bit
7
6
5
4
3
2
1
0
Name
Type
Default
General-purpose event status
RCU
0
RCU
0
R
0
RCU
0
RCU
0
RCU
0
RCU
0
RCU
0
Register:
Offset:
Type:
General-purpose event status
88h
Read/Clear/Update, Read-only
00h
Default:
Table 4−10. General-Purpose Event Status Register Description
BIT
SIGNAL
TYPE
FUNCTION
7 ‡
PWR_STS
RCU
Power change status. This bit is set when software changes the V
or V
PP
power state of either socket.
level to or from 12 V
CC
12-V V
for either socket.
request status. This bit is set when software has changed the requested V
PP
PP
6 ‡
5
VPP12_STS
RSVD
RCU
R
Reserved. This bit returns 0 when read. A write has no effect.
GPI4 status. This bit is set on a change in status of the MFUNC5 terminal input level if configured as a
general-purpose input, GPI4.
4 ‡
GP4_STS
RCU
GPI3 status. This bit is set on a change in status of the MFUNC4 terminal input level if configured as a
general-purpose input, GPI3.
3 ‡
2 ‡
1 ‡
0 ‡
GP3_STS
GP2_STS
GP1_STS
GP0_STS
RCU
RCU
RCU
RCU
GPI2 status. This bit is set on a change in status of the MFUNC2 terminal input level if configured as a
general-purpose input, GPI2.
GPI1 status. This bit is set on a change in status of the MFUNC1 terminal input level if configured as a
general-purpose input, GPI1.
GPI0 status. This bit is set on a change in status of the MFUNC0 terminal input level if configured as a
general-purpose input, GPI0.
‡
One or more bits in this register are cleared only by the assertion of GRST.
4−22
TI [ TEXAS INSTRUMENTS ]
