CXA2101AQ
AGING2
BRIGHT
(1) : All black output aging mode ON/OFF switch
Input signals are cut off inside the Y/color difference signal processing system. As a
result, the signals which were input to the RGB system are output.
0 = OFF
1 = ON
(6) : Main brightness control
Output DC bias setting for RGBOUT
0h = –13 IRE
1Fh = CENTER
3Fh = +13 IRE
YSYM1SW
YM-VM
(1) : On/off switching for YS/YM-1 input pin (Pin 45)
0 = On
1 = Off
(1) : Mute function ON/OFF switch for VM-OUT (Pin 59) in YM ON block
Setting takes effect for both YS/YM-1 (Pin 45) and YS/YM-2 (Pin 49)
0 = OFF: no muting
1 = ON: muting
SHARPNESS (6) : Sharpness gain control (when SYSTEM = 0, SUB-SHP = 0, SHP-F0 = 1)
0h = –12dB
1Fh = 0dB
3Fh = +6dB
R-DRIVE
(6) : R channel drive gain control
0h = –4.2dB
29h = 0dB
3Fh = +2.1dB
D-COL
(1) : Dynamic color ON/OFF switch
0 = OFF
1 = ON
G-DRIVE
(6) : G channel drive gain control
0h = –4.2dB
29h = 0dB
3Fh = +2.1dB
CLPSW
(1) : Switch for selecting replacement pulse for color difference input pin offset control
0 = Pulse generated inside IC (replaced in period extending from rise of pulse which is
input to HP-IN to the fall of pulse in 1)
1 = Clamping pulse which has been separated from SCP
– 21 –
SONY [ SONY CORPORATION ]
