CXA2101AQ
G-Y/B
(4) : G-Y axis –(B-Y) component setting
0h = Maximum
Fh = Minimum
Detection axis standard values
R-Y/R
R-Y/B
Ch
G-Y/R
Ah
G-Y/B
5h
NTSC-JAPAN
NTSC-USA
6h
7h
Dh
2h
8h
Bh
PAL/SECAM
Fh
8h
4h
LRGB2-LEVEL (4) : LRGB2 system picture level control
0h = –5dB
Fh = 0dB
GAMMA
(4) : Control of gamma correction amount
0h = OFF
Fh = MAX (output increased by 15 IRE at input 40 IRE point)
PABL-LEVEL (4) : Setting of level detection DC at RGB-OUT of PEAK-ABL
0h = Level detection DC: 4.9V
Fh = Level detection DC: 6.8V
BLK-BOTTOM (4) : RGB-OUT bottom limiter level control (valid when BLKSW = 1)
The limiter level is replaced with the reference DC for each H in RGB system, and it is
defined by the drop voltage from that DC; it is not dependent on DC level control setting
made by BRIGHT, etc. This limiter functions for all video signals. For further details, refer
to the description of operation.
0h = Limiter level: –1.25V
Fh = Limiter level: –0.65V
SUB-SHP
SHP-F0
(2) : Sharpness center control (when SYSTEM = 0, SHARPNESS = 1F, SHP-F0 = 1)
0 = 0dB
3 = +4dB
(2) : Sharpness f0 setting (automatically set to f0 best suited to each system)
NORMAL
FF
HD
FIX-HD
(SYSTEM = 0) (SYSTEM = 1) (SYSTEM = 2) (SYSTEM = 3)
0 =
3 =
3.1MHz
4.9MHz
6.1MHz
9.5MHz
9.1MHz
9.1MHz
14.3MHz
14.3MHz
PRE/OVER
(2) : Preshoot to overshoot ratio setting
0 = PRE : OVER 1 : 1.3
3 = PRE : OVER 3 : 1
– 25 –
SONY [ SONY CORPORATION ]
