CXA2101AQ
MAT-OUT
(2) : Selection of type matrix conversion; selected signal is output from Pins 76, 77 and 78. A
DC voltage of approximately 4V is output only for 3 of these modes.
0 = THROUGH1 (when YCbCr is input)
1 = Matrix conversion of YPbPr to YCbCr signal
2 = Matrix conversion of GBR to YCbCr signal
3 = THROUGH2 (GBR is input directly to internal RGB system)
YCbCr/MAT
(1) : Selection of IN1 system signal or SELIN system signal for signal sent to Y color
difference processing system. H and V sync signals are simultaneously selected and
output.
0 = IN1 system input selected
1 = SELIN system input selected
HYSW
(1) : Switch for switching signal output to YG-OUT pin
0 = For a sync on Y, sync on Green input
1 = For a composite sync input
PICTURE
(6) : Picture gain control; valid for input signals except for LRGB2.
0h = –16dB
3Fh = 0dB
LIMIT-LEVEL (2) : Limiter to cope with excessively high inputs.
0 = OFF
1 = 111 IRE
2 = 119 IRE
3 = 127 IRE
HUE
(6) : Hue control
0h = –33°
Flesh color appears red.
1Fh = CENTER
3Fh = +33°
Flesh color appears green.
SYSTEM
(2) : Signal frequency band switching; select the band in accordance with the TV system.
0 = NORMAL
1 = FF
2 = HD
3 = FIX-HD (setting which gives greater importance to frequency response than 2)
COLOR
AGING1
(6) : Color gain control
0h = Color OFF
1Fh = 0dB
3Fh = +6.2dB
(1) : White output aging mode ON/OFF switch
83 IRE flat signal is output from Y system
0 = OFF
1 = ON
– 20 –
SONY [ SONY CORPORATION ]
