CXA2101AQ
Description of Registers
PICON
(1) : ON/OFF switch for RGB outputs including reference pulse
(Set to OFF mode at power-on)
0 = RGB output OFF (all blanking mode)
1 = RGB output ON
RON
(1) : ON/OFF switch for R channel video output excluding reference pulse
(Valid when PICON = 1; set to OFF mode at power-on)
0 = R channel video output OFF (blanking mode, REF-P only output)
1 = R channel video output ON
GON
(1) : ON/OFF switch for G channel video output excluding reference pulse
(Valid when PICON = 1; set to OFF mode at power-on)
0 = G channel video output OFF (blanking mode, REF-P only output)
1 = G channel video output ON
BON
(1) : ON/OFF switch for B channel video output excluding reference pulse
(Valid when PICON = 1; set to OFF mode at power-on)
0 = B channel video output OFF (blanking mode, REF-P only output)
1 = B channel video output ON
CBLKOFF
(1) : ON/OFF switch for H, V blanking of RGB output (set to ON mode at power-on)
AKB system is set to the OFF mode at the same time as the blanking is set off.
0 = CBLK ON; AKB ON
1 = CBLK OFF; AKB OFF
The pedestal potential when AKB is OFF can be set by the voltage applied to the
R-SH, G-SH and B-SH pins for R, G, B, respectively.
AKB-T
(1) : Selection of timing pulse which generates reference pulse
(Set to NORMAL mode at power-on)
0 = NORMAL mode (reference pulse generated by SCP input only)
1 = V compression mode (reference pulse generated from VTIM-IN, HP-IN)
BLKSW
(1) : Selection of H, V blanking system for RGB-OUT
(Set to 0 at power-on.)
0 = Normal blanking mode (blanking up to VCE (SAT) level)
1 = Blanking at value set by BLK-BOTTOM
(Refer to the description of the BLK-BOTTOM register.)
INPUT-SEL
(2) : Selection of four system inputs: IN2, IN3, IN4 and IN5
0 = IN2 selected
1 = IN3 selected
2 = IN4 selected
3 = IN5 selected
– 19 –
SONY [ SONY CORPORATION ]
