MX25L12835F
Reset Commands
RST
(Reset
Memory)
Command
(byte)
NOP
RSTEN
(No Operation) (Reset Enable)
Mode
SPI/QPI
00 (hex)
SPI/QPI
66 (hex)
SPI/QPI
99 (hex)
1st byte
2nd byte
3rd byte
4th byte
5th byte
Action
Note 1: The count base is 4-bit for ADD(2) and Dummy(2) because of 2 x I/O. And the MSB is on SO/SIO1 which is different
from 1 x I/O condition.
Note 2: ADD=00H will output the manufacturer ID first and AD=01H will output device ID first.
Note 3: It is not recommended to adopt any other code not in the command definition table, which will potentially enter the hid-
den mode.
Note 4: Before executing RST command, RSTEN command must be executed. If there is any other command to interfere, the
reset operation will be disabled.
Note 5: The number in parentheses after "ADD" or "Data" stands for how many clock cycles it has. For example, "Data(8)"
represents there are 8 clock cycles for the data in.
P/N: PM1795
REV. 1.0, OCT. 23, 2012
19
Macronix [ MACRONIX INTERNATIONAL ]
