BYTE-WIDE SmartVoltage FlashFile™ MEMORY FAMILY
E
V
IH
RY/BY# (R)
VIL
P2
VIH
RP# (P)
VIL
P1
Figure 17. AC Waveform for Reset Operation
Table 8. Reset Specifications
2.7 V VCC 3.3 V VCC
5 V VCC
#
Sym
Parameter
Notes Min Max Min Max Min Max Unit
tPLPH RP# Pulse Low Time (If RP# is tied to VCC
,
100
100
100
P1
ns
this specification is not applicable)
tPLRH RP# Low to Reset during Block Erase,
Program, or Lock-Bit Configuration
20
12
P2
2,3
µs
NOTES:
1. These specifications are valid for all product versions (packages and speeds).
2. If RP# is asserted when the WSM is not busy (RY/BY# = “1”), the reset will complete within 100 ns.
3. A reset time, tPHQV, is required from the latter of RY/BY# or RP# going high until outputs are valid.
34
PRELIMINARY
INTEL [ INTEL ]
