BYTE-WIDE SmartVoltage FlashFile™ MEMORY FAMILY
E
6.0 ELECTRICAL SPECIFICATIONS
NOTICE: This datasheet contains information on new
products in production. Do not finalize a design with this
information. Revised information will be published when
the product is available. Verify with your local Intel Sales
office that you have the latest datasheet before finalizing a
design.
6.1
Absolute Maximum Ratings*
Temperature under Bias ................ –10°C to +80°C
Storage Temperature....................–65°C to +125°C
*WARNING: Stressing the device beyond the “Absolute
Maximum Ratings” may cause permanent damage. These
are stress ratings only. Operation beyond the “Operating
Conditions” is not recommended and extended exposure
beyond the “Operating Conditions” may affect device
reliability.
Voltage on Any Pin
(except VPP, and RP#)......... –2.0 V to +7.0 V(1)
VPP Voltage ........................... –2.0 V to +14.0 V(1,2)
RP# Voltage ........................–2.0 V to +14.0 V(1,2,4)
Output Short Circuit Current ....................100 mA(3)
NOTES:
1. All specified voltages are with respect to GND. Minimum DC voltage is–0.5 V on input/output pins and –0.2 V on VCC, RP#,
and VPP pins. During transitions, this level may undershoot to–2.0 V for periods <20 ns. Maximum DC voltage on
input/output pins and VCC is VCC +0.5 V which, during transitions, may overshoot to VCC +2.0 V for periods <20 ns.
2. Maximum DC voltage on VPP and RP# may overshoot to +14.0 V for periods <20 ns.
3. Output shorted for no more than one second. No more than one output shorted at a time.
4. RP# voltage is normally at VIL or VIH. Connection to supply of VHH is allowed for a maximum cumulative period of 80 hours.
6.2
Commercial Temperature Operating Conditions
Commercial Temperature and VCC Operating Conditions
Symbol
Parameter
Notes
Min
0
Max
+70
3.6
Unit
°C
V
Test Condition
TA
Operating Temperature
Ambient Temperature
VCC1
VCC2
VCC3
VCC Supply Voltage (2.7 V–3.6 V)
VCC Supply Voltage (3.3 V ± 0.3 V)
VCC Supply Voltage (5 V ± 5%)
VCC Supply Voltage (5 V ± 10%)
1
2.7
3.0
4.75
4.5
3.6
V
5.25
5.5
V
VCC4
V
NOTE:
1. Block erase, program, and lock-bit configuration withV
< 3.0 V should not be attempted.
CC
(1)
6.3
Capacitance
TA = +25°C, f = 1 MHz
Symbol
Parameter
Typ
6
Max
8
Unit
Condition
VIN = 0.0 V
CIN
Input Capacitance
Output Capacitance
pF
pF
COUT
8
12
VOUT = 0.0 V
NOTE:
1. Sampled, not 100% tested.
30
PRELIMINARY
INTEL [ INTEL ]
