EPCS Device Memory Access
Page 17
Resetting the write enable latch bit to
accepted. Set the write enable latch bit to
bulk, and erase sector operations.
0
indicates that no write or erase cycle is
before every write bytes, write status, erase
1
The non-volatile block protect bits determine the area of the memory protected from
being written or erased unintentionally. Table 9 through Table 13 on page 19 list the
protected area in the EPCS devices with reference to the block protect bits. The erase
bulk operation is only available when all the block protect bits are set to
of the block protect bits are set to , the relevant area is protected from being written
by a write bytes operation or erased by an erase sector operation.
0. When any
1
April 2014 Altera Corporation
Serial Configuration (EPCS) Devices Datasheet