EDD51323DBH-LS
Electrical Specifications
• All voltages are referenced to VSS (GND).
• After power up, wait more than 200 µs and then, execute power on sequence and CBR (Auto) refresh before
proper device operation is achieved.
Absolute Maximum Ratings
Parameter
Symbol
VT
Rating
Unit
V
Note
Voltage on any pin relative to VSS
Supply voltage relative to VSS
Short circuit output current
Power dissipation
−0.5 to +2.3
−0.5 to +2.3
50
VDD
IOS
PD
V
mA
W
1.0
Operating ambient temperature
Storage temperature
TA
−25 to +85
−55 to +125
°C
°C
Tstg
Caution
Exposing the device to stress above those listed in Absolute Maximum Ratings could cause
permanent damage. The device is not meant to be operated under conditions outside the limits
described in the operational section of this specification. Exposure to Absolute Maximum Rating
conditions for extended periods may affect device reliability.
Recommended DC Operating Conditions (TA = −25°C to +85°C)
Parameter
Pins
Symbol
min.
1.7
typ.
1.8
max.
1.95
Unit
V
Notes
1
VDD,
VDDQ
Supply voltage
VSS,
VSSQ
0
0
0
V
Input high voltage
Input low voltage
All other input VIH
0.8 × VDDQ
−0.3
—
—
—
VDDQ + 0.3
0.2 × VDDQ
VDDQ + 0.3
V
V
V
pins
VIL
DC input voltage level
CK, /CK
VIN (DC)
−0.3
AC Input differential cross
point voltage
VIX
0.4 × VDDQ
0.5 × VDDQ 0.6 × VDDQ
V
6
DC input differential voltage
AC input differential voltage
DC input high voltage
DC input low voltage
VID (DC)
VID (AC)
0.4 × VDDQ
0.6 × VDDQ
0.7× VDDQ
−0.3
—
—
—
—
—
—
VDDQ + 0.6
VDDQ + 0.6
VDDQ + 0.3
0.3 × VDDQ
VDDQ + 0.3
0.2 × VDDQ
V
V
V
V
V
V
5
5
DQ, DM, DQS VIHD (DC)
VILD (DC)
AC input high voltage
AC input low voltage
VIHD (AC)
0.8× VDDQ
−0.3
VILD (AC)
Notes: 1. VDDQ must be equal to VDD.
2. VIH (max.) = 2.3V (pulse width ≤ 5ns).
3. VIL (min.) = −0.5V (pulse width ≤ 5ns).
4. All voltage referred to VSS and VSSQ must be same potential.
5. VID (DC) and VID (AC) are the magnitude of the difference between the input level on CK and the input
level on /CK.
6. The value of VIX is expected to be 0.5 × VDDQ and must track variations in the DC level of the same.
Preliminary Data Sheet E1432E20 (Ver. 2.0)
5