Table 149. MMINT Register
MMINT (S:E7h Read Only) – MMC Interrupt Register
7
6
5
4
3
2
1
0
MCBI
EORI
EOCI
EOFI
F2FI
F1FI
F2EI
F1EI
Bit
Bit
Number
Mnemonic Description
MMC Card Busy Interrupt Flag
Set by hardware when the card enters or exits its busy state (when the busy
signal is asserted or deasserted on the data line).
Cleared when reading MMINT.
7
MCBI
End of Response Interrupt Flag
6
5
4
3
2
1
0
EORI
EOCI
EOFI
F2FI
F1FI
F2EI
F1EI
Set by hardware at the end of response reception.
Cleared when reading MMINT.
End of Command Interrupt Flag
Set by hardware at the end of command transmission.
Clear when reading MMINT.
End of Frame Interrupt Flag
Set by hardware at the end of frame (stream or block) transfer.
Clear when reading MMINT.
FIFO 2 Full Interrupt Flag
Set by hardware when second FIFO becomes full.
Cleared by hardware when second FIFO becomes empty.
FIFO 1 Full Interrupt Flag
Set by hardware when first FIFO becomes full.
Cleared by hardware when first FIFO becomes empty.
FIFO 2 Empty Interrupt Flag
Set by hardware when second FIFO becomes empty.
Cleared by hardware when second FIFO becomes full.
FIFO 1 Empty Interrupt Flag
Set by hardware when first FIFO becomes empty.
Cleared by hardware when first FIFO becomes full.
Reset Value = 0000 0011b
154
AT8xC51SND2C
4341D–MP3–04/05
ATMEL [ ATMEL ]
