AV-51002
2017.02.10
1-75
HPS JTAG Timing Specifications
HPS JTAG Timing Specifications
Table 1-62: HPS JTAG Timing Parameters and Values for Arria V Devices
Symbol
Description
Min
30
14
14
2
Max
—
Unit
ns
ns
ns
ns
ns
ns
ns
ns
ns
tJCP
tJCH
tJCL
TCK clock period
TCK clock high time
TCK clock low time
—
—
tJPSU (TDI)
tJPSU (TMS)
tJPH
TDI JTAG port setup time
TMS JTAG port setup time
JTAG port hold time
JTAG port clock to output
—
3
—
5
—
tJPCO
—
—
—
12(90)
14(90)
14(90)
tJPZX
JTAG port high impedance to valid output
JTAG port valid output to high impedance
tJPXZ
Configuration Specifications
is section provides configuration specifications and timing for Arria V devices.
POR Specifications
Table 1-63: Fast and Standard POR Delay Specification for Arria V Devices
POR Delay
Minimum
Maximum
Unit
Fast
4
12(91)
ms
(90)
(91)
A 1-ns adder is required for each VCCIO _HPS voltage step down from 3.0 V. For example, tJPCO= 13 ns if VCCIO _HPS of the TDO I/O bank = 2.5 V, or
14 ns if it equals 1.8 V.
e maximum pulse width of the fast POR delay is 12 ms, providing enough time for the PCIe hard IP to initialize afer the POR trip.
Arria V GX, GT, SX, and ST Device Datasheet
Send Feedback
Altera Corporation