VS1005g Datasheet
10 VS1005 PERIPHERALS AND REGISTERS
10.23 Special Features
10.23.1 Software Protection
Vs1005 hardware supports software protection. Two registers control the hardware debugging
and serial flash access. To use on-circuit debugging it must first be enabled by a software
register. After power-up the debugger is disabled. The register can be set and reset by soft-
ware. The access to serial flash can be disabled with a software register after boot-up. When
serial flash is disabled it can not be enabled by software. To re-enable it requires system reset
(SYSRST).
Version: 0.2, 2012-03-16
99
ETC [ ETC ]
