®
PMD-100
PMD-100 Process Decoder
Program Mode
Important: In Program mode (PROG pin 9 high) the mode enable input clock (MEN pin 14), which enters data and
commands on its rising edge, must remain high after the last command is executed, as shown in the timing diagram.
Bringing it low again can cause the equivalent of a soft mute, or other anomalies.
The modes set by the three inputs MS3, MS2 and MS1 are described below: (High = 1, Low = 0).
Pacific Microsonics, Inc.
11
32990 Alvarado Niles Road, Suite 910
Union City, CA 94587
Phone (510) 475-8000
Fax (510) 475-8005
ETC [ ETC ]
