欢迎访问ic37.com |
会员登录 免费注册
发布采购

TMXF281553BAL-3C-DB 参数 Datasheet PDF下载

TMXF281553BAL-3C-DB图片预览
型号: TMXF281553BAL-3C-DB
PDF下载: 下载PDF文件 查看货源
内容描述: 电信/数据通信\n [Telecomm/Datacomm ]
分类和应用: 电信数据通信
文件页数/大小: 784 页 / 10078 K
品牌: ETC [ ETC ]
 浏览型号TMXF281553BAL-3C-DB的Datasheet PDF文件第281页浏览型号TMXF281553BAL-3C-DB的Datasheet PDF文件第282页浏览型号TMXF281553BAL-3C-DB的Datasheet PDF文件第283页浏览型号TMXF281553BAL-3C-DB的Datasheet PDF文件第284页浏览型号TMXF281553BAL-3C-DB的Datasheet PDF文件第286页浏览型号TMXF281553BAL-3C-DB的Datasheet PDF文件第287页浏览型号TMXF281553BAL-3C-DB的Datasheet PDF文件第288页浏览型号TMXF281553BAL-3C-DB的Datasheet PDF文件第289页  
Data Sheet  
June 2002  
TMXF28155 Supermapper  
155/51 Mbits/s SONET/SDH x28/x21 DS1/E1  
12 28-Channel Framer Registers (continued)  
Table 397. FRM_PMLR4, Performance Monitor Link Register 4 (COR) (continued)  
Address* Bit  
Name  
Function  
Reset  
Default  
0x8LP83  
5
4
FRM_CRCTX  
CRC-4 Multiframe Alignment Timer Expired. A 1 indicates  
that either the 100 ms or the 400 ms interworking timer expired.  
It is only active immediately after basic frame alignment is found  
in CEPT CRC-4 modes. This signal is set when the error  
occurs, and is cleared when it is read if there is not another  
error during the read.  
0
FRM_LTS0MFA Loss of Time Slot 0 CRC-4 Multiframe Alignment. A 1 indi-  
cates the absence of CRC-4 multiframe alignment. This bit is  
set when basic frame alignment has been found and multiframe  
alignment is being searched for, or when multiframe alignment  
is lost but basic frame alignment remains good, or when multi-  
frame alignment is lost.  
0
Note: This is a stored version of the status. It is cleared after  
one good multiframe bit is seen.  
CRC-4 multiframe alignment is assumed lost when there are  
three consecutive errors in the CRC-4 multiframe alignment bits  
(bit 0 of NOTFAS frames 1, 3, 5, 7, 9, and 11). Loss of CRC-4  
multiframe alignment may optionally cause a research for  
CRC-4 multiframe alignment without affecting the current basic  
frame alignment.  
CEPT with CRC-4 only. In all other modes, this bit is a 0.  
3
2
FRM_TS0MFABE Time Slot 0 Multiframe Alignment Signal Bit Error. A 1  
indicates that the receive framer detected an error in the CRC-4  
multiframe alignment signal. A 0 indicates no errors. Bit 0 of  
NOTFAS frames (1, 3, 5, 7, 9, and 11).  
0
0
FRM_SES  
Severely Errored Second (G.826 Annex B). A 1 indicates the  
receive framer detected a severely errored second. The events  
that can cause an errored second are provisionable for DS1  
links in Table 329 and for CEPT links in Table 332. The  
severely errored second threshold is provisionable; DS1-SF  
links in Table 326 on page 252, DS1-ESF links in Table 328 on  
page 253, and CEPT links in Table 331 on page 253.  
* See Table 393 on page 279 for values of L and P.  
Agere Systems Inc.  
285  
 复制成功!