欢迎访问ic37.com |
会员登录 免费注册
发布采购

TMXF281553BAL-3C-DB 参数 Datasheet PDF下载

TMXF281553BAL-3C-DB图片预览
型号: TMXF281553BAL-3C-DB
PDF下载: 下载PDF文件 查看货源
内容描述: 电信/数据通信\n [Telecomm/Datacomm ]
分类和应用: 电信数据通信
文件页数/大小: 784 页 / 10078 K
品牌: ETC [ ETC ]
 浏览型号TMXF281553BAL-3C-DB的Datasheet PDF文件第280页浏览型号TMXF281553BAL-3C-DB的Datasheet PDF文件第281页浏览型号TMXF281553BAL-3C-DB的Datasheet PDF文件第282页浏览型号TMXF281553BAL-3C-DB的Datasheet PDF文件第283页浏览型号TMXF281553BAL-3C-DB的Datasheet PDF文件第285页浏览型号TMXF281553BAL-3C-DB的Datasheet PDF文件第286页浏览型号TMXF281553BAL-3C-DB的Datasheet PDF文件第287页浏览型号TMXF281553BAL-3C-DB的Datasheet PDF文件第288页  
TMXF28155 Supermapper  
155/51 Mbits/s SONET/SDH x28/x21 DS1/E1  
Data Sheet  
June 2002  
12 28-Channel Framer Registers (continued)  
Table 397. FRM_PMLR4, Performance Monitor Link Register 4 (COR) (continued)  
Address* Bit  
Name  
Function  
Reset  
Default  
0x8LP83  
8
FRM_RAI  
Remote Alarm Indication. A 1 indicates the receive framer  
0
detected a remote (yellow) alarm or detected an RAI indication  
on the TDM bus from the mapper.  
D4: Bit 2 of all time slots is a 0 for one frame. (ANSI T1.403,  
Section 9.1.)  
DDS: Bit 6 of time slot 24 is a 0 for 12 frames.  
ESF: The user should use register 0x8LP85, bit 4,  
ESF_FDL_RAI/Yellow Alarm.  
CEPT Basic Frame: RAI is activated when bit 3 of the NOTFAS  
frame is 1 RAC consecutive times. RAI is deactivated when bit  
3 of the NOTFAS frame is a 0 RDC consecutive times. RAI acti-  
vation count (RAC) and RAI deactivation count (RDC) are provi-  
sionable in Table 325 on page 251.  
Option 0: Bit 3 of the NOTFAS frame is a 1 one consecutive  
time. RAI is inactive when bit 3 is set to a 0.  
Option 1: RAI is set on three consecutive ones and deactivated  
on three consecutive zeros.  
Option 2: Bit 3 of the NOTFAS frame is a 1 four consecutive  
times. RAI is inactive when bit 3 is set to a 1 in less than two  
consecutive occasions. (O.162, Section 2.1.4.)  
Option 3: RAI is set on five consecutive ones and deactivated  
on five consecutive zeros. (ETS 300.417-1-1.)  
CEPT CRC-4 Multiframe: Reception of 1 bit A with a content  
of 1. (G.965, Section 16.1.2.)  
7
6
FRM_SA600X1E Sa6 = 00x1 Event. This bit indicates detection of an Sa6 = 00x1  
event. The Sa6 code is detected synchronously to the CRC-4  
multiframe and is not counted during loss of CRC-4 multiframe  
alignment. This detection is not qualified by Sa5 = 1, unlike bits  
6 and 8 of Table 406 on page 291.  
0
0
FRM_SA6001XE Sa6 = 001x Event. This bit indicates detection of an Sa6 = 001x  
event. The Sa6 code is detected synchronously to the CRC-4  
multiframe and is not counted during loss of CRC-4 multiframe  
alignment. This detection is not qualified by Sa5 = 1, unlike bits  
7 and 8 of Table 406.  
* See Table 393 on page 279 for values of L and P.  
284  
Agere Systems Inc.  
 复制成功!