Spartan-3E FPGA Family: Pinout Descriptions
Revision History
The following table shows the revision history for this document.
Date
Version
1.0
Revision
03/01/2005
03/21/2005
Initial Xilinx release.
1.1
Added XC3S250E in the CP132 package to Table 128. Corrected number of differential I/O pairs on
CP132. Added pinout and footprint information for the CP132, FG400, and FG484 packages. Removed
IRDY and TRDY pins from the VQ100, TQ144, and PQ208 packages.
11/23/2005
03/22/2006
2.0
3.0
Corrected title of Table 152. Updated differential pair numbering for some pins in Bank 0 of the FG400
package, affecting Table 151 and Figure 87. Pin functionality and ball assignment were not affected.
Added Package Thermal Characteristics section. Added package mass values to Table 125.
Included I/O pins, not just input-only pins under the VREF description in Table 124. Clarified that some
global clock inputs are Input-only pins in Table 124. Added information on the XC3S100E in the CP132
package, affecting Table 128, Table 129, Table 132, Table 133, Table 135, and Figure 81. Ball A12 on
the XC3S1600E in the FG320 package a full I/O pin, not an Input-only pin. Corrected the I/O counts
for the XC3S1600E in the FG320 package, affecting Table 128, Table 149, Table 150, and Figure 86.
Corrected pin type for XC3S1600E balls N14 and N15 in Table 147.
05/19/2006
11/09/2006
3.1
3.4
Minor text edits.
Added package thermal data for the XC3S100E in the CP132 package to Table 129. Corrected pin
migration arrows for balls E17 and F4 between the XC3S500E and XC3S1600E in Table 150.
Promoted Module 4 to Production status. Synchronized all modules to v3.4.
03/16/2007
05/29/2007
3.5
3.6
Minor formatting changes.
Corrected ‘Lxx’ to ‘Lxxy’ in Table 124. Noted that some GCLK and VREF pins are on INPUT pins in
Table 124 and Table 128. Added link before Table 127 to Material Declaration Data Sheets.
04/18/2008
3.7
Added XC3S500E VQG100 package. Added Material Declaration Data Sheet links in Table 127.
Updated Thermal Characteristics in Table 129. Updated links.
08/26/2009
10/29/2012
3.8
4.0
Minor typographical updates.
Added Notice of Disclaimer. This product is not recommended for new designs.
Updated the XC3S250E-FT256 in Table 128.
07/19/2013
12/14/2018
4.1
4.2
Removed banner. This product IS recommended for new designs.
Updated for Lead-Frame Plating Composition Change For Legacy Eutectic Products (XCN18024).
Updated Table 125 and Note 1. Updated the Mechanical Drawings section and removed Table 127.
DS312 (v4.2) December 14, 2018
www.xilinx.com
Product Specification
226
XILINX [ XILINX, INC ]
