MSP430F530x, MSP430F5310
SLAS677B –SEPTEMBER 2010–REVISED MARCH 2011
www.ti.com
PMM, SVM High Side
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
SVMHE = 0, DVCC = 3.6 V
MIN
TYP
0
MAX UNIT
nA
I(SVMH)
SVMH current consumption
SVMHE= 1, DVCC = 3.6 V, SVMHFP = 0
SVMHE = 1, DVCC = 3.6 V, SVMHFP = 1
SVMHE = 1, SVSMHRRL = 0
SVMHE = 1, SVSMHRRL = 1
SVMHE = 1, SVSMHRRL = 2
SVMHE = 1, SVSMHRRL = 3
SVMHE = 1, SVSMHRRL = 4
SVMHE = 1, SVSMHRRL = 5
SVMHE = 1, SVSMHRRL = 6
SVMHE = 1, SVSMHRRL = 7
SVMHE = 1, SVMHOVPE = 1
200
1.5
µA
1.85
1.62
1.88
2.07
2.20
2.32
2.52
2.90
2.90
1.74
1.94
2.14
2.30
2.40
2.70
3.10
3.10
3.75
2.07
2.28
2.42
(1)
V(SVMH)
SVMH on/off voltage level
2.55
2.88
3.23
3.23
V
SVMHE = 1, dVDVCC/dt = 10 mV/µs,
SVMHFP = 1
2.5
20
tpd(SVMH)
SVMH propagation delay
SVMH on/off delay time
µs
µs
SVMHE = 1, dVDVCC/dt = 1 mV/µs,
SVMHFP = 0
SVMHE = 0 → 1
SVMHFP = 1
12.5
100
t(SVMH)
SVMHE = 0 → 1
SVMHFP = 0
(1) The SVMH settings available depend on the VCORE (PMMCOREVx) setting. See the Power Management Module and Supply Voltage
Supervisor chapter in the MSP430x5xx/MSP430x6xx Family User's Guide (SLAU208) on recommended settings and usage.
PMM, SVS Low Side
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
SVSLE = 0, PMMCOREV = 2
MIN
TYP
0
MAX UNIT
nA
I(SVSL)
SVSL current consumption
SVSLE = 1, PMMCOREV = 2, SVSLFP = 0
SVSLE = 1, PMMCOREV = 2, SVSLFP = 1
200
2.0
µA
SVSLE = 1, dVCORE/dt = 10 mV/µs,
SVSLFP = 1
2.5
20
tpd(SVSL)
SVSL propagation delay
SVSL on/off delay time
µs
µs
SVSLE = 1, dVCORE/dt = 1 mV/µs,
SVSLFP = 0
SVSLE = 0 → 1
SVSLFP = 1
12.5
100
t(SVSL)
SVSLE = 0 → 1
SVSLFP = 0
PMM, SVM Low Side
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
SVMLE = 0, PMMCOREV = 2
MIN
TYP
0
MAX UNIT
nA
µA
µs
I(SVML)
SVML current consumption
SVMLE= 1, PMMCOREV = 2, SVMLFP = 0
SVMLE= 1, PMMCOREV = 2, SVMLFP = 1
SVMLE = 1, dVCORE/dt = 10 mV/µs, SVMLFP = 1
SVMLE = 1, dVCORE/dt = 1 mV/µs, SVMLFP = 0
SVMLE = 0 → 1, SVMLFP = 1
200
1.5
2.5
20
tpd(SVML)
SVML propagation delay
SVML on/off delay time
12.5
100
t(SVML)
µs
SVMLE = 0 → 1, SVMLFP = 0
52
Submit Documentation Feedback
Copyright © 2010–2011, Texas Instruments Incorporated
TI [ TEXAS INSTRUMENTS ]
