MSP430F530x, MSP430F5310
SLAS677B –SEPTEMBER 2010–REVISED MARCH 2011
www.ti.com
MAX UNIT
PMM, Brown-Out Reset (BOR)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
| dDVCC/dt | < 3 V/s
| dDVCC/dt | < 3 V/s
MIN
TYP
BORH on voltage,
DVCC falling level
V(DVCC_BOR_IT–)
1.45
1.50
V
V
BORH off voltage,
DVCC rising level
V(DVCC_BOR_IT+)
V(DVCC_BOR_hys)
0.80
60
1.30
BORH hysteresis
250 mV
Pulse length required at
RST/NMI pin to accept a
reset
tRESET
2
µs
PMM, Core Voltage
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
Core voltage, active mode,
PMMCOREV = 3
VCORE3(AM)
VCORE2(AM)
VCORE1(AM)
VCORE0(AM)
VCORE3(LPM)
VCORE2(LPM)
VCORE1(LPM)
VCORE0(LPM)
2.4 V ≤ DVCC ≤ 3.6 V
1.90
V
Core voltage, active mode,
PMMCOREV = 2
2.2 V ≤ DVCC ≤ 3.6 V
2.0 V ≤ DVCC ≤ 3.6 V
1.8 V ≤ DVCC ≤ 3.6 V
2.4 V ≤ DVCC ≤ 3.6 V
2.2 V ≤ DVCC ≤ 3.6 V
2.0 V ≤ DVCC ≤ 3.6 V
1.8 V ≤ DVCC ≤ 3.6 V
1.80
1.60
1.40
1.94
1.84
1.64
1.44
V
V
V
V
V
V
V
Core voltage, active mode,
PMMCOREV = 1
Core voltage, active mode,
PMMCOREV = 0
Core voltage, low-current mode,
PMMCOREV = 3
Core voltage, low-current mode,
PMMCOREV = 2
Core voltage, low-current mode,
PMMCOREV = 1
Core voltage, low-current mode,
PMMCOREV = 0
50
Submit Documentation Feedback
Copyright © 2010–2011, Texas Instruments Incorporated
TI [ TEXAS INSTRUMENTS ]
