MSP430FR573x
MSP430FR572x
www.ti.com
SLAS639D –JULY 2011–REVISED AUGUST 2012
MIXED SIGNAL MICROCONTROLLER
1
FEATURES
23
•
Embedded Microcontroller
–
eUSCI_A0 and eUSCI_A1 Support:
–
16-Bit RISC Architecture up to 24-MHz
Clock
–
UART With Automatic Baud-Rate
Detection
–
–
Wide Supply Voltage Range (2 V to 3.6 V)
-40°C to 85°C Operation
–
–
IrDA Encode and Decode
SPI at Rates up to 10 Mbps
•
Optimized Ultra-Low Power Modes
–
–
eUSCI_B0 Supports:
–
–
I2C With Multi-Slave Addressing
Consumption
Mode
SPI at Rates up to 10 Mbps
(Typical)
81.4 µA/MHz
6.3 µA
Hardware UART or I2C Bootstrap Loader
(BSL)
Active Mode
Standby (LPM3 With VLO)
Real-Time Clock (LPM3.5 With Crystal)
Shutdown (LPM4.5)
•
•
Power Management System
1.5 µA
0.32 µA
–
–
Fully Integrated LDO
Supply Voltage Supervisor for Core and
Supply Voltages With Reset Capability
•
Ultra-Low Power Ferroelectric RAM
–
–
–
Up to 16KB Nonvolatile Memory
Ultra-Low Power Writes
–
–
Always-On Zero-Power Brownout Detection
Serial On-Board Programming With No
External Voltage Needed
Fast Write at 125 ns per Word (16KB in 1
ms)
Flexible Clock System
–
–
Built in Error Coding and Correction (ECC)
and Memory Protection Unit (MPU)
–
Fixed-Frequency DCO With Six Selectable
Factory-Trimmed Frequencies (Device
Dependent)
Universal Memory = Program + Data +
Storage
1015 Write Cycle Endurance
–
Low-Power Low-Frequency Internal Clock
Source (VLO)
–
–
Radiation Resistant and Nonmagnetic
–
–
32-kHz Crystals (LFXT)
•
Intelligent Digital Peripherals
High-Frequency Crystals (HFXT)
–
–
–
32-Bit Hardware Multiplier (MPY)
Three-Channel Internal DMA
•
•
Development Tools and Software
–
Free Professional Development
Environments (IAR, CCS, GCC)
Real-Time Clock With Calendar and Alarm
Functions
–
Low-Cost Full-Featured Kit (MSP-
EXP430FR5739)
–
–
Five 16-Bit Timers With up to Three
Capture/Compare
–
–
Full Development Kit (MSP-FET430U40A)
Target Board (MSP-TS430RHA40A)
16-Bit Cyclic Redundancy Checker (CRC)
•
High-Performance Analog
Family Members
–
16-Channel Analog Comparator With
Voltage Reference and Programmable
Hysteresis
–
20 Different Variants and 5 Available
Packages Summarized in Table 1 and
Table 2
–
14-Channel 10-Bit Analog-to-Digital
Converter (ADC) With Internal Reference
and Sample-and-Hold
–
For Complete Module Descriptions, See the
MSP430FR57xx Family User's Guide
(SLAU272)
–
200 ksps at 100-µA Consumption
•
Enhanced Serial Communication
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
MSP430 is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
3
UNLESS OTHERWISE NOTED this document contains
PRODUCTION DATA information current as of publication date.
Products conform to specifications per the terms of Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011–2012, Texas Instruments Incorporated
TI [ TEXAS INSTRUMENTS ]
