CXA2101AQ
LTI-LEVEL
(2) : Luminance signal edge enhancement setting
0 = OFF
1 = Low
2 = Medium
3 = High
VM-LEV
(2) : VM-OUT level control
0 = OFF
1 = Low
2 = Medium
3 = High
VM-DEL
(2) : VM-OUT phase control; defined by difference in phase from R-OUT
0 = Short
3 = Long
DC-TRAN
(2) : Y system DC transmission ratio setting
0 = 100%
1 = 77%
∗
These variable range is the case when SCP clamp pulse duty is 4%.
D-PIC
(2) : Dynamic picture (black expansion) control
0 = OFF
1 = Low: inflection point 30 IRE
2 = Medium: inflection point 35 IRE
3 = High: inflection point 40 IRE
Status Register
EH
(1) : Availability of independent H input pins in input system selected by INPUT-SEL
0 = Not available
1 = Available
EV
IK
(1) : Availability of independent V input pins in input system selected by INPUT-SEL
0 = Not available
1 = Available
(1) : AKB loop operation status (REF-P on cathode current Ik detected)
0 = All REF-P for RGB within stability domain
1 = Small and unstable REF-P
Note: Due to the nature of the circuit operation, "0" is returned at power-on.
This is to be ignored by the microcomputer for 2 seconds after power-on.
– 26 –