±15kV ESD Protected MII/RMII 10/100 Ethernet Transceiver with HP Auto-MDIX Support and flexPWR® Technology in a Small Footprint
Datasheet
Table 10.1 Customer Revision History (continued)
REVISION LEVEL
& DATE
SECTION/FIGURE/ENTRY
CORRECTION
Rev. 1.2
Table 7.11
Added RX_DV to table.
(05-23-07)
Rev. 1.2
(05-23-07)
Table 3.1
Table 6.7
Table 7.4
Table 3.4
Table 5.40
Table 5.29
Table 5.23
Added note that RX_DV and RX_ER cannot be
high during reset.
Rev. 1.2
(05-23-07)
Moved parameter T8.2 from MAX column to MIN
column.
Rev. 1.1
(04-17-07)
Changed column headings to add clarity regarding
source of current. Added Note.
Rev. 1.1
(04-17-07)
Removed RX_CLK/REGOFF because it made
Note 3.1 false.
Rev. 1.1
(04-12-07)
Added this table to describe the register.
Added Register 26.
Rev. 1.1
(04-12-07)
Rev. 1.1
(04-12-07)
Changed description from Reserved to Symbol
Error Counter.
Rev. 1.0
(04-04-07)
Table 5.30, “Register 0 - Basic
Control,” on page 42
Table modified: Default column for “Power Down”
and “Isolate”.
Rev 1.0
(01-12-07)
Section 4.6.3, "MII vs. RMII
Configuration," on page 28
Fixed a typo, GPO0/MII is on the 187,
COL/RMII/CRS_DV is on the 8700.
Section 8.1, "Application Diagram,"
on page 75
Added support components to crystal in application
diagram circuit. also added a note to the bottom to
indicate that purpose of R5 added.
Table 5.33, “Register 3 - PHY
Identifier 2,” on page 43
Corrected reg3 values.
Section 4.9.1, "Disable the Internal
+1.8V Regulator," on page 31
Changed paragraph to correctly reflect operation
VDDIO and VDDA latch 1.8V regulator. 1.8v strap
above VIH or below VIL.
SMSC LAN8700/LAN8700i
Revision 2.3 (04-12-11)
DATA8S3HEET
SMSC [ SMSC CORPORATION ]
