欢迎访问ic37.com |
会员登录 免费注册
发布采购

M66291GP 参数 Datasheet PDF下载

M66291GP图片预览
型号: M66291GP
PDF下载: 下载PDF文件 查看货源
内容描述: ASSP ( USB2.0设备控制器) [ASSP (USB2.0 Device Controller)]
分类和应用: 总线控制器微控制器和处理器外围集成电路数据传输时钟
文件页数/大小: 126 页 / 893 K
品牌: RENESAS [ RENESAS TECHNOLOGY CORP ]
 浏览型号M66291GP的Datasheet PDF文件第4页浏览型号M66291GP的Datasheet PDF文件第5页浏览型号M66291GP的Datasheet PDF文件第6页浏览型号M66291GP的Datasheet PDF文件第7页浏览型号M66291GP的Datasheet PDF文件第9页浏览型号M66291GP的Datasheet PDF文件第10页浏览型号M66291GP的Datasheet PDF文件第11页浏览型号M66291GP的Datasheet PDF文件第12页  
M66291GP/HP
Item
Pin Name
Input/
Output
Function
Pin
Count
DMA
interface
*Dack1
(
Note1
)
*TC1
Input
DMA Acknowledge 1
This pin enables access of FIFO by DMA transfer for DMA channel 1.
1
Input
Terminal Count 1
This pin indicates the final transfer cycle at “L” level for DMA channel 1.
This is valid only in write cycle. Set to “H” level when not used.
1
USB
interface
D+
Input/
Output
USB Data (+)
D+ of USB. Connect an external resistance in series.
USB Data (-)
D- of USB. Connect an external resistance in series.
Vbus Input (with built-in pulldown resistance)
Connect to the Vbus of USB bus or to the 5V power supply.
Connection or shutdown of the Vbus can be detected.
1
D-
Input/
Output
1
Vbus
Input
1
TrON
Output
TrON Output
This pin is connected to the D+ pullup resistance of 1.5 KΩ.
This pin is used to control ON/OFF of the pullup resistance.
1
Others
*RST
Input
Reset
This pin is used to initialize the values of the internal register or the counter at
"L" level.
1
Xin
Input
Oscillator
Input
These pins are used to input/output the signals of internal clock
oscillation circuits. Connect a crystal unit between Xin and Xout
pins.
1
Xout
Output
Oscillator
Output
If an external clock signal is used, connect it to the Xin pin and
leave the Xout pin open.
1
TEST
Input
TEST Input (with built-in pulldown resistance)
This pin is input for the test. Set to "L" level or keep open.
1
CoreVcc
(
Note
2)
Core Power Supply
These pins are used as the power source for internal logic, FIFO memory, PLL
circuit, USB transceiver and oscillation buffer.
2
IOVcc
(
Note 3
)
GND
I/O Power Supply
2
Ground
3
A pin preceded by an asterisk "*" is an active low pin.
(Example: *CS pin is an active low, CS)
Note 1: The polarities of *Dreq, *Dack, *INT, and *SOF pins can be changed by the internal registers.
Note 2: The Xin, Xout, Vbus, D+ and D- pins are all driven by CoreVcc.
Note 3: The pins for bus interface, interrupt, DMA control, reset and test are all driven by IOVcc. See
Figure 1.2
.
Rev1.01
2004.11.01
page 8 of 122