欢迎访问ic37.com |
会员登录 免费注册
发布采购

HD64F3337YF16 参数 Datasheet PDF下载

HD64F3337YF16图片预览
型号: HD64F3337YF16
PDF下载: 下载PDF文件 查看货源
内容描述: 单片机 [Single-Chip Microcomputer]
分类和应用: 微控制器和处理器外围集成电路
文件页数/大小: 747 页 / 2993 K
品牌: RENESAS [ RENESAS TECHNOLOGY CORP ]
 浏览型号HD64F3337YF16的Datasheet PDF文件第268页浏览型号HD64F3337YF16的Datasheet PDF文件第269页浏览型号HD64F3337YF16的Datasheet PDF文件第270页浏览型号HD64F3337YF16的Datasheet PDF文件第271页浏览型号HD64F3337YF16的Datasheet PDF文件第273页浏览型号HD64F3337YF16的Datasheet PDF文件第274页浏览型号HD64F3337YF16的Datasheet PDF文件第275页浏览型号HD64F3337YF16的Datasheet PDF文件第276页  
Setting the MPIE bit to 1 enables the multiprocessor receive interrupt function. In this condition, if  
the multiprocessor bit in the receive data is 0, the receive-end interrupt (RXI) and receive-error  
interrupt (ERI) are disabled, the receive data is not transferred from RSR to RDR, and the RDRF,  
FER, PER, and ORER bits in the serial status register (SSR) are not set. If the multiprocessor bit is  
1, however, the MPB bit in SSR is set to 1, the MPIE bit is cleared to 0, the receive data is  
transferred from RSR to RDR, the FER, PER, and ORER bits can be set, and the receive-end and  
receive-error interrupts are enabled.  
Bit 3: MPIE  
Description  
0
The multiprocessor receive interrupt function is disabled.  
(Normal receive operation)  
(Initial value)  
1
The multiprocessor receive interrupt function is enabled. During the interval  
before data with the multiprocessor bit set to 1 is received, the receive interrupt  
request (RXI) and receive-error interrupt request (ERI) are disabled, the RDRF,  
FER, PER, and ORER bits are not set in the serial status register (SSR), and  
no data is transferred from the RSR to the RDR. The MPIE bit is cleared at the  
following times:  
1. When 0 is written in MPIE.  
2. When data with the multiprocessor bit set to 1 is received.  
Bit 2—Transmit-End Interrupt Enable (TEIE): This bit enables or disables the TSR-empty  
interrupt (TEI) requested when the transmit-end bit (TEND) in the serial status register (SSR) is  
set to 1.  
Bit 2: TEIE  
Description  
0
1
The TSR-empty interrupt request (TEI) is disabled.  
The TSR-empty interrupt request (TEI) is enabled.  
(Initial value)  
Bit 1—Clock Enable 1 (CKE1): This bit selects the internal or external clock source for the baud  
rate generator. When the external clock source is selected, the SCK pin is automatically used for  
input of the external clock signal.  
Bit 1: CKE1  
Description  
0
Internal clock source  
(Initial value)  
When C/A = 1, the serial clock signal is output at the SCK pin.  
When C/A = 0, output depends on the CKE0 bit.  
External clock source. The SCK pin is used for input.  
1
242  
 复制成功!