(2) Manual Reset
•
Sources:
SCK2 pin low level and 5(6(7 pin low level
When a general exception other than a user break occurs while the BL bit is set to 1 in SR
When the watchdog timer overflows while the WT/,7 bit and RSTS bit are both set to 1 in
WTCSR. For details, see section 10, Clock Oscillation Circuits.
•
•
Transition address: H'A000 0000
Transition operations:
Exception code H'020 is set in EXPEVT, initialization of VBR and SR is performed, and a
branch is made to PC = H'A000 0000.
In the initialization processing, the VBR register is set to H'0000 0000, and in SR, the MD,
RB, and BL bits are set to 1, the FD bit is cleared to 0, and the interrupt mask bits (I3–I0) are
set to B'1111.
CPU and on-chip peripheral module initialization is performed. For details, see the register
descriptions in the relevant sections.
Manual_reset()
{
EXPEVT = H'00000020;
VBR = H'00000000;
SR.MD = 1;
SR.RB = 1;
SR.BL = 1;
SR.(I0-I3) = B'1111;
SR.FD = 0;
Initialize_CPU();
Initialize_Module(Manual);
PC = H'A0000000;
}
Table 5.3 Types of Reset
Reset State Transition
Conditions
Internal States
On-Chip Peripheral
Type
SCK2
High
Low
5(6(7
Low
Low
CPU
Modules
Power-on reset
Manual reset
Initialized
Initialized
See Register
Configuration in
each section
Rev. 6.0, 07/02, page 137 of 986
RENESAS [ RENESAS TECHNOLOGY CORP ]
