MIL-M-38510/131A
1.3 Absolute maximum ratings.
Supply voltage (V ) ....................................................................... ±22 V
CC
Input voltage (V ) ........................................................................... ±V
CC
IN
Differential input voltage range ......................................................... ±0.5 V
Output short-circuit duration ............................................................. 1/
Lead temperature (soldering, 60 seconds) ...................................... +300°C
Storage temperature range .............................................................. -65°C to +150°C
Junction temperature (T ) ................................................................ +175°C
J
1.4 Recommended operating conditions.
Supply voltage range ....................................................................... ±3.0 V dc to ±20.0 V
Ambient operating temperature range (T ) ...................................... -55°C to +125°C
A
1.5 Power and thermal characteristics.
Case outlines
Maximum allowable 2/
power dissipation
Maximum
Maximum
θ
θ
JA
JC
G
P
40°C/W
150°C/W
330 mW at T = +125°C
A
35°C/W
120°C/W
400 mW at T = +125°C
A
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications and standards form a part of this
specification to the extent specified herein. Unless otherwise specified, the issues of these documents are those
cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-PRF-38535 - Integrated Circuits (Microcircuits) Manufacturing, General Specification for.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-883
- Test Method Standard for Microelectronics.
MIL-STD-1835 - Interface Standard Electronic Component Case Outlines.
(Copies of these documents are available online at http://assist.daps.dla.mil;quicksearch/ or www.dodssp.daps.mil
or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-
5094.)
______
1/ Output may be shorted to ground indefinitely at V = ±15 volts, T = 25°C. Temperature and/or supply
S
A
voltages must be limited to ensure dissipation rating is not exceeded.
2/ All leads welded or soldered to P.C. board.
2
RAYTHEON [ RAYTHEON COMPANY ]
