NSE-8G™ Standard Product Data Sheet
Preliminary
Register 10BH + N*20H: T8TE Time-slot Configuration #2
Bit
Type
Function
Unused
Default
Bit 31:8
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
X
0
0
0
0
0
0
0
0
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
TMODE12[1]
TMODE12[0]
TMODE11[1]
TMODE11[0]
TMODE10[1]
TMODE10[0]
TMODE9[1]
TMODE9[0]
Register 03H configures the path termination mode of time-slots 9 to 12 of the T8TE.
TMODE9[1:0]-TMODE12[1:0]
The time-slot path termination mode select register bits (TMODE9[1:0]-TMODE12[1:0])
configures the mode settings for time-slots 9 to 12 of the T8TE. Time-slots are numbered in
order of transmission in the Incoming TeleCombus stream (ID[7:0]). Time-slot #1 is the first
byte transmitted and time-slot #12 is the last byte transmitted. The setting stored in
TMODEx[1:0] (x can be 1-12) determines which set of TeleCombus control signals are to be
encoded in 8B/10B characters.
In TeleCombus mode, the T8TE encodes TeleCombus control signals such as transport frame
and payload boundaries, pointer justification events and alarm conditions into three levels of
an extended set of 8B/10B characters as well as performing the IEEE mode conversion on
data. The two hierarchical levels are High-order Path Termination (HPT) and Low-order Path
Termination (LPT). For correct operation see the table below:
TMODEx[1]
0
TMODEx[0]
0
Mode
Reserved
Functional Description
invalid
0
1
HPT level
Use for TelecomBus where V1/V2 pointers must
be preserved
1
1
0
1
LPT level
Reserved
Use for SBI336S or TelecomBus with valid V5
but without valid V1/V2 pointers
invalid
Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers’ Internal Use
Document ID: PMC-2010850, Issue 1
108
PMC [ PMC-SIERRA, INC ]
