欢迎访问ic37.com |
会员登录 免费注册
发布采购

PM7325-TC 参数 Datasheet PDF下载

PM7325-TC图片预览
型号: PM7325-TC
PDF下载: 下载PDF文件 查看货源
内容描述: S / UNI - ATLAS -3200电信标准产品数据表初步 [S/UNI-ATLAS-3200 Telecom Standard Product Data Sheet Preliminary]
分类和应用: ATM集成电路SONET集成电路SDH集成电路电信电路异步传输模式
文件页数/大小: 432 页 / 2222 K
品牌: PMC [ PMC-SIERRA, INC ]
 浏览型号PM7325-TC的Datasheet PDF文件第52页浏览型号PM7325-TC的Datasheet PDF文件第53页浏览型号PM7325-TC的Datasheet PDF文件第54页浏览型号PM7325-TC的Datasheet PDF文件第55页浏览型号PM7325-TC的Datasheet PDF文件第57页浏览型号PM7325-TC的Datasheet PDF文件第58页浏览型号PM7325-TC的Datasheet PDF文件第59页浏览型号PM7325-TC的Datasheet PDF文件第60页  
S/UNI®-ATLAS-3200 Telecom Standard Product Data Sheet  
Preliminary  
Pin Name  
OCIF_ERR  
(A) not used  
(B) not used  
(C) RPP_ERR  
Type  
Output  
Pin No Function  
(C) Error: discard packet. RPP_ERR is used to indicate that the  
current packet is in error and should be discarded. RPP_ERR is  
only asserted when RPP_EOP is asserted.  
RPP_ERR is considered valid only when RPP_VAL is asserted.  
(D) TLP_ERR  
(D) Error. Packet should be aborted. Will only be asserted when  
TEOP is simultaneously asserted; only valid when TENB is  
asserted.  
OCIF_ADDR[5:0]  
I/O  
(A) RPU_ADDR[5:0]  
Input  
(A) PHY address (valid values 0 to 47).  
RPU_ADDR indicates the PHYID for which RPU_CLAV is to  
respond, and (on the last cycle during which RPU_ENB is  
deasserted) indicates the PHYID on which to transfer then next  
cell.  
The use of these bits is optional. If the UTOPIA Master is not  
designed to poll this interface, then the Rx PHY UTOPIA  
interface can be made to look like a single-PHY interface via the  
SERVEOVRD bit in the RxP Configuration Register. In this case,  
S/UNI-ATLAS-3200 will perform weighted-round-robin servicing  
on all the PHY queues internally, and CLAV will indicate whether  
a cell is available on any PHYID. In this case, these bits should  
be tied low.  
(B) TLU_ADDR[5:0]  
Output  
(B) PHY address. TLU_ADDR indicates the PHYID for which  
TLU_CLAV is to respond, and (on the last cycle during which  
TLU_WRENB is deasserted) indicates the PHYID which the  
subsequent cell belongs to.  
(C) not used  
Input  
(C) Unused  
(D) TLP_ADDR[5:0]  
Output  
(D) PHY address (valid values 0 to 47). The TLP_ADDR bus is  
used with the TLP_PTPA signal to poll the transmit FIFOs packet  
available status.  
When TLP_ADDR is sampled on the rising edge of TLP_CLK by  
the PHY, the polled packet available indication TLP_PTPA signal  
is expected to be updated with the status of the port specified by  
the TLP_ADDR address on the following rising edge of  
TLP_CLK.  
Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers’ Internal Use  
Document ID: PMC-1990553, Issue 4  
56  
 复制成功!