PM73121ꢀAAL1gator II
Data Sheet
PMC-Sierra, Inc.
PMC-980620
,VVXHꢀꢁ
AAL1 SAR Processor
7.2 Initialization
The memory must be initialized to 0 (unless otherwise indicated) before the software reset is
released. The number of data structures used by the device in reserved areas depends on this
initialization.
7.3 Control Registers Summary
Table 21. Control Register Summary
Amount of
Memory
Address
Name
R/W Organization
Description
0 0000h
DEVICE_REV
R/W 1 word
2 bytes
The Device Revision register indicates the
revision of the device.
0 0001h
COMP_LIN_REG
R/W 1 word
2 bytes
The Composite Line Register provides overall
mode information.
0 0010h
0 0011h
0 0012h
0 0013h
0 0014h
0 0015h
0 0016h
0 0017h
LIN_STR_MODE_0
LIN_STR_MODE_1
LIN_STR_MODE_2
LIN_STR_MODE_3
LIN_STR_MODE_4
LIN_STR_MODE_5
LIN_STR_MODE_6
LIN_STR_MODE_7
R/W 1 word
R/W 1 word
R/W 1 word
R/W 1 word
R/W 1 word
R/W 1 word
R/W 1 word
R/W 1 word
2 bytes
2 bytes
2 bytes
2 bytes
2 bytes
2 bytes
2 bytes
2 bytes
The Line Structure Mode register identifies
which data structure type will be supported
for each line. This is selectable on a line basis.
7.4 Control Register Descriptions
NOTES:
•
•
All ports marked as “Reserved” must be initialized to 0 at initial setup. Software mod-
ifications to these locations after setup will cause incorrect operation.
All read/write port bits marked “Not used” must be written with the value 0 to main-
tain software compatibility with future versions.
ꢀꢁꢂ
PMC [ PMC-SIERRA, INC ]
