STANDARD PRODUCT
PM5365 TEMAP
DATASHEET
PMC-1991148
ISSUE 3
HIGH DENSITY VT/TU MAPPER
AND M13 MULTIPLEXER
Pin Name
Type Pin Function
No.
LDPL
Input AA16
Line Drop Bus Payload Active (LDPL). The payload
active signal identifies the bytes on LDDATA[7:0] that
carry payload bytes.
LDPL is set high during path overhead and payload
bytes and low during transport overhead bytes. LDPL
is set high during the H3 byte to indicate a negative
pointer justification and low during the byte following
H3 to indicate a positive pointer justification event.
LDPL is sampled on the rising edge of LREFCLK.
LDV5
Input AB17
Input AB13
Line Drop Bus V5 Byte (LDV5). The incoming
tributary V5 byte signal marks the various tributary V5
bytes. LDV5 marks each tributary V5 byte on the
LDDATA[7:0] bus when high.
LDV5 is sampled on the rising edge of LREFCLK.
LDTPL
Line Drop Bus Tributary Payload Active (LDTPL).
The tributary payload active signal marks the bytes
carrying the tributary payload which have been
identified by an external payload processor. When this
signal is available, the internal pointer processor can
be bypassed.
LDTPL is high during each tributary payload byte on
the LDDATA[7:0] bus. In floating mode, LDTPL
contains valid data only for bytes in the VC3 or VC4
virtual containers, or the STS-1 SPE. It should be
ignored for bytes in the transport overhead. In locked
mode, LDTPL is low for transport overhead.
LDTPL is sampled on the rising edge of LREFCLK.
LDAIS
Input AB12
Line Drop Bus Tributary Path Alarm Indication
Signal (LDAIS). The active high tributary path alarm
indication signal identifies tributaries on the incoming
data stream LDDATA[7:0] that are in AIS state. When
this signal is available, the internal pointer processor
can be bypassed. LDAIS is invalid when LDTPL is low.
LDAIS is sampled on the rising edge of LREFCLK.
Proprietary and Confidential to PMC-Sierra, Inc. and for its Customers’ Internal Use
42
PMC [ PMC-SIERRA, INC ]
