欢迎访问ic37.com |
会员登录 免费注册
发布采购

PM5365-PI 参数 Datasheet PDF下载

PM5365-PI图片预览
型号: PM5365-PI
PDF下载: 下载PDF文件 查看货源
内容描述: VT / TU映射器和M13多路复用器 [VT/TU MAPPER AND M13 MULTIPLEXER]
分类和应用: 复用器
文件页数/大小: 244 页 / 1139 K
品牌: PMC [ PMC-SIERRA, INC ]
 浏览型号PM5365-PI的Datasheet PDF文件第47页浏览型号PM5365-PI的Datasheet PDF文件第48页浏览型号PM5365-PI的Datasheet PDF文件第49页浏览型号PM5365-PI的Datasheet PDF文件第50页浏览型号PM5365-PI的Datasheet PDF文件第52页浏览型号PM5365-PI的Datasheet PDF文件第53页浏览型号PM5365-PI的Datasheet PDF文件第54页浏览型号PM5365-PI的Datasheet PDF文件第55页  
STANDARD PRODUCT  
PM5365 TEMAP  
DATASHEET  
PMC-1991148  
ISSUE 3  
HIGH DENSITY VT/TU MAPPER  
AND M13 MULTIPLEXER  
Pin Name  
Type Pin Function  
No.  
LADATA[0]  
LADATA[1]  
LADATA[2]  
LADATA[3]  
LADATA[4]  
LADATA[5]  
LADATA[6]  
LADATA[7]  
Output AB8  
Line Add Bus Data (LADATA[7:0]). The add bus data  
contains the SONET transmit payload data in byte  
serial format. All transport overhead bytes are set to  
00h. The phase relation of the SPE (VC) to the  
transport frame is determined by the Add Bus  
composite timing signal LAC1J1V1 and is SW  
selectable to be either 0 or 522. LADATA[7] is the most  
significant bit (corresponding to bit 1 of each serial  
word, the first bit to be transmitted).  
W7  
Tristate  
W8  
AB9  
W9  
Y10  
AA10  
AB10  
LADATA[7:0] is only asserted during the SONET/SDH  
tributaries assigned to this device as determined by the  
LAOE bit in the TTMP Tributary Control registers.  
LADATA[7:0] is updated on the rising edge of  
LREFCLK.  
LADP  
Output W10  
Tristate  
Line Add Bus Data Parity (LADP). The Add Bus data  
parity signal carries the parity of the outgoing signals.  
The parity calculation encompasses the LADATA[7:0]  
bus and optionally the LAC1J1V1 and LAPL signals.  
LAC1J1V1 and LAPL can be included in the parity  
calculation by setting the INCLAC1J1V1 and INCLAPL  
register bits in the Master SONET/SDH Egress  
Configuration register high, respectively. Odd parity is  
selected by setting the LAOP register bit in the same  
register high and even parity is selected by setting the  
LAOP bit low.  
LADP is only asserted during the SONET/SDH  
tributaries assigned to this device as determined by the  
LAOE bit in the TTMP Tributary Control registers.  
LADP is updated on the rising edge of LREFCLK.  
LAPL  
Output Y11  
Tristate  
Line Add Bus Payload Active (LAPL). The Add Bus  
payload active signal identifies the payload bytes on  
LADATA[7:0]. LAPL is set high during path overhead  
and payload bytes and low during transport overhead  
bytes.  
LAPL is only asserted during the SONET/SDH  
tributaries assigned to this device as determined by the  
LAOE bit in the TTMP Tributary Control registers.  
LAPL is updated on the rising edge of LREFCLK.  
Proprietary and Confidential to PMC-Sierra, Inc. and for its Customers’ Internal Use  
40  
 复制成功!