欢迎访问ic37.com |
会员登录 免费注册
发布采购

PM4328-PI 参数 Datasheet PDF下载

PM4328-PI图片预览
型号: PM4328-PI
PDF下载: 下载PDF文件 查看货源
内容描述: 高密度T1 / E1成帧器,集成M13多路复用器 [HIGH DENSITY T1/E1 FRAMER WITH INTEGRATED M13 MULTIPLEXER]
分类和应用: 复用器数字传输控制器电信集成电路电信电路异步传输模式ATM
文件页数/大小: 250 页 / 1399 K
品牌: PMC [ PMC-SIERRA, INC ]
 浏览型号PM4328-PI的Datasheet PDF文件第54页浏览型号PM4328-PI的Datasheet PDF文件第55页浏览型号PM4328-PI的Datasheet PDF文件第56页浏览型号PM4328-PI的Datasheet PDF文件第57页浏览型号PM4328-PI的Datasheet PDF文件第59页浏览型号PM4328-PI的Datasheet PDF文件第60页浏览型号PM4328-PI的Datasheet PDF文件第61页浏览型号PM4328-PI的Datasheet PDF文件第62页  
STANDARD PRODUCT  
PM4328 TECT3  
DATASHEET  
PMC-2011596  
ISSUE 1  
HIGH DENSITY T1/E1 FRAMER  
AND M13 MULTIPLEXER  
Pin Name  
Type Pin Function  
No.  
SDDATA[0]  
SDDATA[1]  
SDDATA[2]  
SDDATA[3]  
SDDATA[4]  
SDDATA[5]  
SDDATA[6]  
SDDATA[7]  
Output A12  
System Drop Bus Data (SDDATA[7:0]). The System  
drop data bus is a time division multiplexed bus which  
carries the T1 and DS3 tributary data is byte serial  
format over the SBI bus structure. This device only  
drives the data bus during the timeslots assigned to  
this device.  
D12  
Tristate  
D11  
A11  
D10  
A10  
B10  
C10  
SDDATA[7:0] is updated on the rising edge of  
SREFCLK.  
This bus shares pins with ID[15,16,19,20,23,24,27,28].  
SDDP  
Output D9  
Tristate  
System Drop Bus Data Parity (SDDP). The system  
drop bus signal carries the even or odd parity for the  
drop bus signals SDDATA[7:0], SDPL and SDV5. The  
TECT3 only drives the data bus parity during the  
timeslots assigned to this device unless configured for  
bus master mode. In this case, all undriven links  
should be driven externally with correctly generated  
parity.  
SDDP is updated on the rising edge of SREFCLK.  
This signal shares a pin with IFP[20].  
SDPL  
Output D8  
Tristate  
System Drop Bus Payload Active (SDPB). The  
payload active signal indicates valid data within the SBI  
bus structure. This signal is asserted during all octets  
making up a tributary. This signal goes high during the  
V3 or H3 octet of a tributary to accommodate negative  
timing adjustments between the tributary rate and the  
fixed SBI bus structure. This signal goes low during the  
octet after the V3 or H3 octet of a tributary to  
accommodate positive timing adjustments between the  
tributary rate and the fixed SBI bus structure.  
The TECT3 only drives the payload active signal  
during the tributary timeslots assigned to this device.  
SDPL is updated on the rising edge of SREFCLK.  
This signal shares a pin with IFP[27].  
SDV5  
Output A9  
Tristate  
System Drop Bus Payload Indicator (SDV5). The  
payload indicator locates the position of the floating  
payloads for each tributary within the SBI bus  
PROPRIETARY AND CONFIDENTIAL  
45  
 复制成功!