CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@
General Specifications
Type
AC power supply models
DC power supply models
Model
CP1E-@@@D@-A
CP1E-@@@D@-D
Enclosure
Mounted in a panel
CPU Unit with 10 I/O points (CP1E-E10D@-@): 90mm *1 ×85mm *2 × 66 mm
CPU Unit with 14 or 20 I/O points (CP1E-@14D@-@/@20D@-@): 90mm *1 × 85mm *2 × 86 mm
CPU Unit with 30 I/O points (CP1E-@30D@-@): 90mm *1 × 85mm *2 × 130 mm
CPU Unit with 40 I/O points (CP1E-@40D@-@): 90mm *1 × 85mm *2 × 150 mm
CPU Unit with 60 I/O points (CP1E-N60D@-@): 90mm *1 ×85mm *2 × 195 mm
CPU Unit with 20 I/O points and built-in analog (CP1E-NA20D@-@): 90mm *1 ×85mm *2 × 130 mm
Dimensions (H × D × W)
CPU Unit with 10 I/O points (CP1E-E10D@-@): 300g max.
CPU Unit with 14 I/O points (CP1E-@14D@-@): 360g max.
CPU Unit with 20 I/O points (CP1E-@20D@-@): 370g max.
CPU Unit with 30 I/O points (CP1E-@30D@-@): 600g max.
CPU Unit with 40 I/O points (CP1E-@40D@-@): 660g max.
CPU Unit with 60 I/O points (CP1E-N60D@-@): 850g max.
CPU Unit with 20 I/O points and built-in analog (CP1E-NA20D@-@): 680g max.
Weight
Supply voltage
100 to 240 VAC 50/60 Hz
24 VDC
Operating voltage
range
85 to 264 VAC
20.4 to 26.4 VDC
15 VA/100 VAC max.
25 VA/240 VAC max.
(CP1E-E10D@-A/@14D@-A/@20D@-A)
9 W max. (CP1E-E10D@-D)
13 W max. (CP1E-N14D@-D/N20D@-D)
Power consumption
Inrush current
50 VA/100 VAC max.
70 VA/240 VAC max.
(CP1E-NA20D@-A/@30D@-A/@40D@-A/N60D@-A)
20 W max.
(CP1E-NA20D@-D/N30D@-D/N40D@-D/N60D@-D) *4
120 VAC, 20 A for 8 ms max. for cold start at room
temperature
240 VAC, 40 A for 8 ms max. for cold start at room
temperature
24 VDC, 30 A for 20 ms max. for cold start at room
temperature
Electrical
specifications
Not provided.
External power supply
*3
(CP1E-E10D@-A/@14D@-A/@20D@-A)
Not provided
24 VDC, 300 mA
(CP1E-NA20D@-A/@30D@-A/@40D@-A/N60D@-A)
20 MΩ min. (at 500 VDC) between the external AC
Except between DC primary current and DC
secondary current
Insulation resistance
Dielectric strength
terminals and GR terminals
2,300 VAC 50/60Hz for 1 min between AC external
and GR terminals Leakage current: 5 mA max.
Except between DC primary current and DC
secondary current
Power OFF detection
time
10 ms min.
0 to 55 °C
2 ms min.
Ambient operating
temperature
Ambient humidity
Atmosphere
10% to 90%
No corrosive gas.
Ambient storage
temperature
-20 to 75 °C (excluding battery)
Altitude
2,000 m max.
Application
environment
Pollution degree
Noise resistance
Overvoltage category
EMC Immunity Level
2 or less: Conforms to JIS B3502 and IEC 61131-2.
2 kV on power supply line (Conforms to IEC61000-4-4.)
Category II: Conforms to JIS B3502 and IEC 61131-2.
Zone B
Conforms to JIS 60068-2-6.
Vibration resistance
Shock resistance
5 to 8.4 Hz with 3.5-mm amplitude, 8.4 to 150 Hz
Acceleration of 9.8 m/s2 for 100 min in X, Y, and Z directions (10 sweeps of 10 min each = 100 min total)
Conforms to JIS 60068-2-27.
147 m/s2, 3 times in X, Y, and Z directions
Terminal block
Fixed (not removable)
M3
Terminal screw size
Applicable standards
Grounding method
Conforms to EC Directive
Ground to 100 Ω or less.
* 1 Total of 110 mm with mounting brackets.
* 2 Excluding cables.
* 3 Use the external power supply to power input devices. Do not use it to drive output devices.
* 4 This is the rated value for the maximum system configuration. Use the following formula to calculate power consumption for CPU Units with
DC power.
Formula: DC power consumption = (5V current consumption ✕ 5 V/70% (internal power efficiency) + 24V current consumption) ✕ 1.1(current
fluctuation factor)
The above calculation results show that a DC power supply with a greater capacity is required.
8
OMRON [ OMRON ELECTRONICS LLC ]
