MT9076
Preliminary Information
Bit
Name
Functional Description
Reserved. Must be kept at 0 for normal operation.
7
- -
6-0
CP6-0
Custom Pulse. These bits provide the capability for programming the magnitude setting for
the TTIP/TRING line driver A/D converter during the third phase of a mark. The greater the
binary number loaded into the register, the greater the amplitude driven out. This feature is
enabled when the control bit 3 - CPL of the Custom Tx Pulse Enable Register - address 11H
of Page 2 is set high.
Table 48 - Custom Pulse Word 3
(Page 2, Address 1EH) (T1)
Bit
Name
Functional Description
7
- -
Reserved. Must be kept at 0 for normal operation.
6-0
CP6-0
Custom Pulse. These bits provide the capability for programming the magnitude setting for
the TTIP/TRING line driver A/D converter during the fourth phase of a mark. The greater the
binary number loaded into the register, the greater the amplitude driven out. This feature is
enabled when the control bit 3 - CPL of the Custom Tx Pulse Enable Register - address 11H
of Page 2 is set high.
Table 49 - Custom Pulse Word 4
(Page 2, Address 1FH) (T1)
74
MITEL [ MITEL NETWORKS CORPORATION ]
