MT90220
7.8 RX Recombiner Registers Description
Tables 76 to 80 describe the RX Recombiner registers.
Address (Hex):
Direct access
Reset Value (Hex):
180 - 187
1 register per RX link
00
Bit #
Type
Description
7:3
2
R
Unused. Read all 0’s.
R/W
Recombiner Control: 1 to enable the recombiner and a 0 to disable. This bit works in
conjunction with the RX Recombiner Delay register.
1:0
R/W
These 2 bits specify which IMA Group the link belongs to:
00: IMA Group #0
01: IMA Group #1
10: IMA Group #2
11: IMA Group #3.
Table 76 - RX Recombiner Registers
Address (Hex):
Direct access
282
1 register for all links. Note: the first link of a group SHALL
NOT be enabled in delayed recombination mode
00
Reset Value (Hex):
Bit #
Type
Description
7
R/W
A 1 enables the circuitry to wait for the first User cells to be received before adding the
link 7 to the recombiner process. A 0 will include the link 7 in the recombiner as soon as it
is enabled in the RX Recombiner register.
6
5
4
3
2
1
0
R/W
R/W
R/W
R/W
R/W
R/W
R/W
A 1 enables the circuitry to wait for the first User cells to be received before adding the
link 6 to the recombiner process. A 0 will include the link 6 in the recombiner as soon as it
is enabled in the RX Recombiner register.
A 1 enables the circuitry to wait for the first User cells to be received before adding the
link 5 to the recombiner process. A 0 will include the link 5 in the recombiner as soon as it
is enabled in the RX Recombiner register.
A 1 enables the circuitry to wait for the first User cells to be received before adding the
link 4 to the recombiner process. A 0 will include the link 4 in the recombiner as soon as it
is enabled in the RX Recombiner register.
A 1 enables the circuitry to wait for the first User cells to be received before adding the
link 3 to the recombiner process. A 0 will include the link 3 in the recombiner as soon as it
is enabled in the RX Recombiner register.
A 1 enables the circuitry to wait for the first User cells to be received before adding the
link 2 to the recombiner process. A 0 will include the link 2 in the recombiner as soon as it
is enabled in the RX Recombiner register.
A 1 enables the circuitry to wait for the first User cells to be received before adding the
link 1 to the recombiner process. A 0 will include the link 1 in the recombiner as soon as it
is enabled in the RX Recombiner register.
A 1 enables the circuitry to wait for the first User cells to be received before adding the
link 0 to the recombiner process. A 0 will include the link 0 in the recombiner as soon as it
is enabled in the RX Recombiner register.
Table 77 - RX Recombiner Delay Control Registers
65
MITEL [ MITEL NETWORKS CORPORATION ]
