SDA 9380 - B21
Preliminary Data Sheet
System description
At power on most of the data are zero by default (if not otherwise specified) before transferring indi-
vidual values via IIC-bus.
Allowed values out of the effective range are limited, e.g. Internal H-sync phase =127 is limited to
119.
There are two bits (BSE, GBE) in the deflection control byte 1 for disabling some control items. If
one of these bits is “0”, the value of the corresponding control item will be ignored and replaced by
the value “default value if disabled” in the table above.
Micronas
5-17
2001-01-29