MX25L12835F
Notes:
1. tCH + tCL must be greater than or equal to 1/ Frequency.
2. Typical values given for TA=25 C. Not 100% tested.
°
3. Only applicable as a constraint for a WRSR instruction when SRWD is set at 1.
4. Test condition is shown as "Figure 81. INPUT TEST WAVEFORMS AND MEASUREMENT LEVEL" and "Figure
82. OUTPUT LOADING".
5. While programming consecutive bytes, Page Program instruction provides optimized timings by selecting to pro-
gram the whole 256 bytes or only a few bytes between 1~256 bytes.
6. “n”=how many bytes to program. In the formula, while n=1, byte program time=12us.
7. By default dummy cycle value. Please refer to the "Table 1. Read performance Comparison".
P/N: PM1795
REV. 1.0, OCT. 23, 2012
90
Macronix [ MACRONIX INTERNATIONAL ]
