LG Semicon
GM72V66841CT/CLT
Burst stop command at burst write: The burst
stop command (BST command) is used to stop
data input during a full-page burst write. No data
is written in the same cycle as the BST
command, and in subsequent cycles.
In addition, the BST command is only valid
during full-page burst mode, and is invalid with
burst lengths of 1, 2, 4, and 8. And an interval of
t
RWL is required between the last data-in and the
next Precharge command.
Burst Length = full page
CLK
PRE/PALL
BST
Command
in
in
DQ(output)
tRWL
lBSW = 0 cycle
23