®
ispLSI 2032/A
In-System Programmable High Density PLD
Features
Functional Block Diagram
• ENHANCEMENTS
— ispLSI 2032A is Fully Form and Function Compatible
to the ispLSI 2032, with Identical Timing
Specifcations and Packaging
— ispLSI 2032A is Built on an Advanced 0.35 Micron
E2CMOS® Technology
• HIGH DENSITY PROGRAMMABLE LOGIC
Global Routing Pool
A0
A1
A2
A7
A6
A5
A4
(GRP)
— 1000 PLD Gates
— 32 I/O Pins, Two Dedicated Inputs
— 32 Registers
— High Speed Global Interconnect
— Wide Input Gating for Fast Counters, State
Machines, Address Decoders, etc.
— Small Logic Block Size for Random Logic
D
D
D
D
Q
Q
Q
Q
Logic
Array
GLB
A3
• HIGH PERFORMANCE E2CMOS® TECHNOLOGY
— fmax = 180 MHz Maximum Operating Frequency
— tpd = 5.0 ns Propagation Delay
— TTL Compatible Inputs and Outputs
— Electrically Erasable and Reprogrammable
— Non-Volatile
— 100% Tested at Time of Manufacture
— Unused Product Term Shutdown Saves Power
0139Bisp/2000
Description
The ispLSI 2032 and 2032A are High Density Program-
mable Logic Devices. The devices contain 32 Registers,
32 Universal I/O pins, two Dedicated Input Pins, three
Dedicated Clock Input Pins, one dedicated Global OE
input pin and a Global Routing Pool (GRP). The GRP
provides complete interconnectivity between all of these
elements. The ispLSI 2032 and 2032A feature 5V in-
system programmability and in-system diagnostic
capabilities. The ispLSI 2032 and 2032A offer non-
volatile reprogrammability of the logic, as well as the
interconnect to provide truly reconfigurable systems.
• IN-SYSTEM PROGRAMMABLE
— In-System Programmable (ISP™) 5V Only
— Increased Manufacturing Yields, Reduced Time-to-
Market and Improved Product Quality
— Reprogram Soldered Devices for Faster Prototyping
• OFFERS THE EASE OF USE AND FAST SYSTEM
SPEED OF PLDs WITH THE DENSITY AND FLEXIBILITY
OF FIELD PROGRAMMABLE GATE ARRAYS
— Complete Programmable Device Can Combine Glue
Logic and Structured Designs
— Enhanced Pin Locking Capability
— Three Dedicated Clock Input Pins
— Synchronous and Asynchronous Clocks
— Programmable Output Slew Rate Control to
Minimize Switching Noise
— Flexible Pin Placement
— Optimized Global Routing Pool Provides Global
Interconnectivity
The basic unit of logic on these devices is the Generic
Logic Block (GLB). The GLBs are labeled A0, A1 .. A7
(Figure 1). There are a total of eight GLBs in the ispLSI
2032 and 2032A devices. Each GLB is made up of four
macrocells. Each GLB has 18 inputs, a programmable
AND/OR/ExclusiveORarray, andfouroutputswhichcan
be configured to be either combinatorial or registered.
Inputs to the GLB come from the GRP and dedicated
inputs. All of the GLB outputs are brought back into the
GRP so that they can be connected to the inputs of any
GLB on the device.
Copyright©2002LatticeSemiconductorCorp. Allbrandorproductnamesaretrademarksorregisteredtrademarksoftheirrespectiveholders. Thespecificationsandinformationhereinaresubject
to change without notice.
LATTICE SEMICONDUCTOR CORP., 5555 Northeast Moore Ct., Hillsboro, Oregon 97124, U.S.A.
Tel. (503) 268-8000; 1-800-LATTICE; FAX (503) 268-8556; http://www.latticesemi.com
January 2002
2032_10
1
LATTICE [ LATTICE SEMICONDUCTOR ]
