1-Gbit P30 Family
Figure 45.
Erase Suspend/Resume Flowchart
ERASE SUSPEND / RESUME PROCEDURE
Start
Bus
Command
Operation
Comments
Write 0x70,
Same Partition
Read
Status
Data = 0x70
Addr = Any partition address
(Read Status)
Write
Write
Read
Data = 0xB0
Addr = Same partition address as
above
Erase
Suspend
Write 0xB0,
Any Address
(Erase Suspend)
Status Register data.
Addr = Same partition
None
None
Read Status
Register
Check SR[7]:
1 = WSM ready
0 = WSM busy
Idle
0
SR[7] =
1
Check SR[6]:
1 = Erase suspended
Idle
None
0 = Erase completed
0
Erase
Completed
SR[6] =
1
Data = 0xFF or 0x40
Addr = Any address within the
suspended partition
Read Array
or Program
Write
Read or
Write
Read array or program data from/to
block other than the one being erased
Read
Program
Read or
Program?
None
Read Array
Data
Program
Loop
Program Data = 0xD0
Resume Addr = Any address
No
Write
Done
If the suspended partition was placed in
Read Array mode or a Program Loop:
Read
Status
Return partition to Status mode:
Data = 0x70
Write 0xD0,
Any Address
Write
(Erase Resume)
Register Addr = Same partition
Erase
Resumed
Write 0xFF,
Erased Partition
(Read Array)
Write 0x70,
Same Partition
Read Array
Data
(Read Status)
April 2005
90
Intel StrataFlash® Embedded Memory (P30)
Order Number: 306666, Revision: 001
Datasheet
INTEL [ INTEL ]
